Perry Machinery Czech Republic: +420 495 822 770 perryczech@perryczech.cz
Stock #HG62275
USED STROJOBAL (CZECH REP.) 300 LITRE TOTAL CAPACITY, STAINLESS STEEL VERTICAL TANK. CARBON STEEL JACKET 165 DEGC MAX. INTERNAL AND JACKET TEMPERATURE. CENTRAL BOTTOM DISCHARGE. PITCHED ANCHOR TYPE OF AGITATOR DRIVEN BY EL. MOTOR 1,1 KW, 50 HZ, MOUNTED ON (3) LUGS.
Location: N/A
Stock #HG59645
Used 4.000 litre vertical stainless steel vessel made Tovaren Potravinarských Stroju, Svidnik (Slovak Republik), type NS-4. Unit measures 1970 mm diameter X 1300 mm straight side.
Location: Central Europe
Stock #HG59696
Second standing lager tank with a volume of 306 L, made of food steel. Sanitation is ensured washout shower. Tank stands on four legs. Tank is equipped with bottom outlet. The height of the tank is 1250 mm, width is 550 mm. Maximum tank pressure is 1 bar pressure relief valve is 1.6 bar. Tanks have two valves at the bottom and one on the mountain plus gauge. Strarte tank is one year.
Location: Central Europe
Stock #H4052-3
Used PRIMA model PPS 200 approximately 400 litre capacity stainless steel vertical mixing vessel. Tank has diameter approx. 840 mm x 750 mm height. The lid has (1) manhole 310 mm x 430 mm and (6) inlets. Unit has bottom entry agitator suitable for viscous products driven by el. motor. Agitator is sealed with mechanical seal. Vessel has (3) stainless steel legs and stands on stainless steel frame. Includes screw pump which is connected with vessel bottom outlet. The pump is belt driven el. motor 5.5 kW. Also includes control panel with touchscreen. New 2001.
Location: EU
Stock #HG59323
Used vertical mixing tank made by J. B. Michiels (Germany). Tank made of stainless steel 316 with working volume 500 litres. Tank has heating jacket made of stainless steel volume 60 litres with working temperature 130 degrees and 3 bar. Tank has 4 blade propeller agitator situated off center. Discharge by bottom side by valve. Max working temperature 130 degrees. Unit is mounted on 3 stainless steel legs. Technical documentation included. New 1989.
Location: Central Europe
Stock #H4185-5
Used Pacov approximately 528 litre capacity vertical stainless steel (AISI 316L) storage tank. Inside surface Ra = 0,4. Vessel measures approx. 800 mm diameter x 790 mm straight side x 1700 mm total height. Has welded conical top head with inspection manway DN400 with hinged lid and welded conical bottom heads. Central bottom discharge DN80. Unit is mounted on (3) stainless steel legs.
Location: Perry Czech Warehouse
Stock #HG59482
Used stainless steel tank with working volume 800 liter. Unit measures approximately 1000mm diameter X 1800mm straight side. Open top.
Location: Central Europe
Stock #HG62342
Little used Pacovske strojirny (Czech republic), 800 litre capacity jacketed stainless steel (1.4301) vertical mixing vessel. Tank has diameter approx. 1200 mm x 800 mm height of straight side, the height of cone part is approx. 550 mm. Total high : 2365mm. Vessel rated 0 bar max. pressure at 90°C. Stainless steel jacket rated 6 bar maximum pressure at 90°C. Unit has top entry belt agitator driven through gearbox by 3,0 kW, 400 V, el. motor Lenze, rotation of agitator approx. 10 rpm. Discharge diam.: 200mm.Vessel has (4) stainless steel legs. Transport dimensions: 2400 mm (lenght) x 1400 mm (width) x 1500 mm (height). Weight : 700kg.
Location: EU
Stock #H4185-2
Used Pacov approximately 815 litre capacity vertical stainless steel (AISI 316L) storage tank. Inside surface Ra = 0,4. Vessel measures approx. 1100 mm diameter x 501 mm straight side x 1680 mm total height. Has welded conical top head with inspection manway DN400 with hinged lid and welded conical bottom heads. Central bottom discharge DN100. Unit is mounted on (3) stainless steel legs.
Location: Perry Czech Warehouse
Stock #H4226-4
Used approximately 900 litre stainless steel storage vessel. Unit measures approximately 900 mm diameter x 1400 mm straight side x 2200 mm total height. Has welded dished top and bottom heads. Has top manhole with diameter approx. 370 mm and central bottom discharge. Mounted on (3) legs. Includes spray ball.
Location: Perry Czech Warehouse
Stock #H4293-1
Used Blefa approximately 1000 litre stainless steel 1.4301 storage/mixing vertical tank. Unit measures approximately 1000 mm diameter x 1000 mm straight side x 1200 mm total height. Has welded dished top and bottom heads. Has top manhole with diameter approx. 400 mm where is mounted central propeler agitator (3 proplelers in different levels). Has a side bottom discharge, approx. diameter 40 mm. Suitable for vacuum max. 0,33 bar. Mounted on zinc coated carbon steel frame for easy manipulation by truck. Includes SIHI AKHQ 3601 vacuum pump driven via Siemens 2,0kW/50Hz/380V/3ph/1425 rpm el. motor. Also include spray balls and piping. Transport dimension: 1 100 x 1 550mm - 2000 mm weight.
Location: Perry Czech Warehouse
Stock #H4306-5
Used Lubke approximately 1000 litre stainless steel storage vessel. Unit measures approximately 1100 mm diameter x 1150 mm straight side x 2040 mm total height. Has welded conical top and bottom heads. Has central top manhole with diameter approx. 400 mm and central bottom discharge with manually operated buttrefly clack valve DN65. Mounted on (4) legs.
Location: Perry Czech Warehouse
Stock #HG59319
Used approximately 1000 liters stainless steel horizontal tank.
Location: Central Europe
Stock #H4185-1
Used Pacov approximately 1578 litre capacity vertical stainless steel (AISI 316L) storage tank. Inside surface Ra = 0,4. Vessel measures approx. 1500 mm diameter x 470 mm straight side x 2000 mm total height. Has welded conical top head with inspection manway DN400 with hinged lid and welded conical bottom heads. Central bottom discharge DN100. Unit is mounted on (3) stainless steel legs.
Location: Perry Czech Warehouse
Stock #H4348-8
Used Tenez 2400 litre capacity vertical polished stainless steel storage tank. Internal polished Ra ≤ 0.4, vessel measures 1388 mm diameter x 1500 mm straight side x 2300 mm total height. Internal rated -1/3 bar maximum pressure at 135°C maximum internal temperature. Vessel is insulated and cladded by stainless steel plate. Has welded dished top head with inspection manway DN500 and welded dished bottom heads. Central bottom discharge DN50. Unit is mounted on (3) stainless steel legs.
Location: Perry Czech Warehouse
Stock #HG59773
Used stainless steel jacketed vertical tank made by Schröder ARD3500/a1 B01, working volume 3500 litres. Vessel has Centric frame type agitator, driven by EL. Motor through gearbox sew with manual variator. Unit has atmospheric jacket (max temperature is 85° Celsius), isolation, straight bevel bottom with side discharge and Conical top with manhole. Included strain gauges and CIP spray head.
Location: SLOVAKIA
Stock #HG59646
Used vertical stainless steel tank made Tovaren Potravinarskach Stroju, Bratislava (Slovak Republik). Tank has a volume of approximately 4000 L. Tank measures 2180 mm diameter X 1250 mm straight side. The tank has a side agitator.
Location: Central Europe
Stock #H4121-2
Used Tenez model ND40 approximately 4000 litre capacity vertical stainless steel storage tank. Vessel measures 1500mm diameter x 2200mm straight side x 3150 mm total height. Has welded conical top head with inspection manway diameter 500 mm and lid and welded conical bottom heads. Central bottom discharge diameter 50 mm with butterfly valve. Wall thickness around 3,0 mm (bottom, top, wall). Unit is mounted on (3) stainless steel legs.
Location: CZ
Stock #H4363-10
Used AAR Montagen 4500 litre capacity vertical stainless steel storage tank. Stainless steel vessel measures approx. 1600 mm diameter x 2100 mm straight side x approx. 3000 mm total height, outer diameter approx. 1800 mm. Vessel is insulated and cladded by stainless steel plate. Internal rated ATM bar pressure and 85°C maximum internal temperature. Has welded dished top head and welded conical bottom. Central top inlet/bottom discharge, also has (2) side bottom flanges DN250. Has top manway with diameter 420 mm. Mounten on (3) legs.
Location: Perry Czech Warehouse
Stock #L1271-37A
(1) HM Rustfri design jacketed tank, stainless steel, working capacity 79.37 gallon (300 liter), inside rated for 40.5 psi (2.7 bar) at 32-194 deg. F (0-90 deg. C). Jacket rated for 53.25 psi (3.55 bar), 32-302 deg. F (0-150 deg. C). Max 81-404 rpm propeller agitator driven via an Ekato fluid FGL-25D gearbox by a sew euro drive 1.13 HP/0.75 kW-230/400volt/50cycle/3PH motor. On 2 legs.
Location: Perry Newton Aycllife, UK
Stock #L1271-36A
Used HM Rustfri design jacketed tank, stainless steel, working capacity 39.68 gallon (150 liter), inside rated for 40.5 psi (2.7 bar) at 32-194 deg. F (0-90 deg. C). Jacket rated for 53.25 psi (3.55 bar), 32-302 deg. F (0-150 deg. C). Max 106-532 rpm propeller agitator driven via an Ekato fluid FGL-25D gearbox by a sew euro drive 1.13 HP/0.75 kW-230/400volt/50cycle/3PH motor. On 2 legs.
Location: Perry, Newton Aycliffe, UK
Stock #U2435-14
Used vertical stainless steel mixing tank with total volume 490 l. Tank has internal diameter 805 mm x lenght straight side of wall 870 mm. Top mounted paddle agitator with welded spiral wires is driven by gearbox and el motor 1.5 kW, 1415 rpm, 230/400 V, 50 hz. Working rotation of agitator up to 22 rpm. Top of the tank has bolted stainless steel cover, with manually operated lid. Bottom welded, elipsoidal, with central discharge outlet, equipped with manually operated valve. Tank is mounted on four stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2433-4
Used vertical stainless steel mixing tank with total volume 150 l. Tank has internal diameter 600 mm x straight side of wall 510 mm. Bottom elipsoidal, with central discharge outlet, equipped with pipe and manually operated valve. Tank is equipped with top mounted, two level paddle agitator, driven by el motor 0.25 kW and reducer. Working rotation up to 53 rpm. Top of the tank has bolted safety bars and hinged lid. Tank is mounted on mobile frame, and has local start/stop electric box. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2404-3
Used stainless steel liquid processing installation, consist of 30 l vertical jacketed mixing tank equipped with propeller type agitator driven el motor 0.12 kW, 1500 rpm, 220/230-380/400V, 50 hz. Tank has internal diameter 345 mm x length of straight side of wall 360 mm. Central bottom discharge outlet. System includes also stainless steel horizontal buffer tank with diameter 430 mm x length of straight side of wall 400 mm, what gives volume 55 l. Buffor tank has three sensors of liquid level and electric heater. For liquid transfer there are mounted two stainless steel contact parts monotype pumps by Neztsch, type 2NL 15A, working rotation up to 214 rpm, each pump is driven by el motor 0.25 kW, 1390 rpm, 220-240/380-420 V, 50 hz. There are also two stainless steel plate heat exchangers by Sondex A/S, model S4-FG. Each heat exchanger has working exchange surface 0.59 m2, power 9 kW, and is designed for work on pressure up to 6 bar, (test pressure 8 bar). Working temperature from 0 up to 110 C. Working liquid flow up to 150 l/h. Product and medium volume - each 8 l. There is also one vertical jacketed stainless steel filtration column. Total volume 10.55 l. All is mounted on stainless steel frame, includes local control panel, piping and valves.
Location: Perry Poland Warehouse
Stock #U2270-11
Used stainless steel contact parts mixing tank with total volume 220 l. Tank has internal diameter 630 mm x depth 700 mm. Top covers bolted, equipped with two agitators: - 3-blade paddle agitator, driven by gearbox and el. motor with power approx 1.5 kW - propeller agitator driven directly by electric motor 0.37 kW, 1350 rpm, 220/380 V, 50 hz. There is also welded static agitator welded to wall of tank. Tank has also temperature sensor mounted at top cover. Mixing chamber is layered with carbon steel jacket, equipped with electric heater. Discharge outlet at the flat bottom, close to side wall. Tank is equipped with circulation pump and local control panel. Machine is mounted on carbon steel mobile frame. Shipping dimensions: L 130 cm x W 70 cm x H 180 cm.
Location: PL
Stock #U2428-3
Used horizontal cooker by Berief Gmbh & Co. KG. with total volume 800 l. Cooking chamber has internal dimensions: diameter 1000 mm x lenght 1000 mm. Machine is rated for work on temperature up to 100 C inside the chamber. Heating channels have volume 55 l and are designed for work on pressure up to 10 bar and temperature up to 184 C. Tank is insulated and layered with stainless steel. Machine has mixing shaft with bolted 6 paddles, each one equipped with wall scrapper, and two side wall scrappers. Shaft is chain driven by el. motor 3 kW and gearbox. Discharge of tank by tilt, operated by el motor 0.55 kW. Top inlet has dimensions 100 cm x 54 cm, and is equipped with safety stainless steel bars and stainless steel cover. Machine is mounted on two supports integrated with drive and controls, however controls need rebuilding. Machine last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2428-4
Used horizontal cooker by Berief Gmbh & Co. KG. with total volume 400 l. Cooking chamber has internal dimensions: diameter 820 mm x lenght 800 mm. Machine is rated for work on temperature up to 100 C inside the chamber. Heating channels have volume 35 l and are designed for work on pressure up to 10 bar and temperature up to 184 C. Tank is insulated and layered with stainless steel. Machine has mixing shaft with bolted 6 paddles, each one equipped with wall scrapper, and two side wall scrappers. Shaft is chain driven by el. motor 2.2 kW and gearbox. Discharge of tank by tilt, operated by el motor 0.55 kW. Top inlet has dimensions 80 cm x 45 cm, and is equipped with safety stainless steel bars and stainless steel cover. Machine is mounted on two supports integrated with drive and controls, however controls need rebuilding. Machine last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2427-3
Used vertical stainless steel storage tank by Seitz (DE) with total volume 130 l. Internal diameter 485 mm x 650 mm length of straight site of wall. Top open - missing lid. Tank has central bottom discharge with manually operated valve. Body of tank is designed for work on pressure up to 3 bar at 120 C. Material - AISI 316. Tank is mounted on three stainless steel legs.
Location: Perry Poland Warehouse
Stock #U2433-2
Used vertical stainless steel jacketed storage tank by Ahlborn with total volume 2600 l. Working volume about 2500 l. Tank has internal diameter 1590 mm x length of staight side of wall 1320 mm. Top open, with hinged stainless steel lid. Rised/lowered manually. Lid has two cleaning nozzles and place for mounting agitator. Bottom of tank flat, with side wall discharge outlet. Tank is equipped with heating/cooling jacket, covering side walls and bottom. Also has thermal insulation. Mounted on 4 stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #L1511-07
Used Sinclair Stainless Ltd approximately 2,100 litre working capacity stainless steel vertical mixing vessel. Unit measures approximately 1,300mm diameter x 1,530mm tan to tan straight side. Unit has welded dished top and welded cone bottom heads. Unit has top entry stainless steel 2-tier 6-blade agitator with top mounted electrical motor. Unit is mounted on side support lugs.
Location: Newton Aycliffe, UK
Stock #U2435-9
Used vertical stainless steel mixing tank with total volume 700 l. Tank has internal diameter 795 mm x length of straight side of wall 1400 mm. Top of the tank has bolted cover, bottom elipsoidal with central discharge outlet, equipped with manually operated valve. Top mounted paddle type agitator with welded spiral wires is driven by el motor 2.4/2 kW, 2830/1400 rpm, 400 V, 50 hz and reducer. Working rotation of agitator is 31/15 rpm. Bottom part of the tank is insulated and layered with stainless steel and equipped with electric heaters mounted on the side walls. Tank is mounted on stainless steel supporting frame with stairs and work platform. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #L1513-10
Used Romabau AG approximately 2,765 litre capacity stainless steel vertical storage tank. Unit measures approximately 1,500mm diameter x 1,100mm straight side. Has welded dished bottom and flat top head with lid. Unit mounted on (3) legs.
Location: Newton Aycliffe, UK
Stock #L1525-15
Used FIB Industriele Bedrijuen BV approximately 3,100 litre stainless steel vertical mixing vessel. Unit has bolted flanged top and welded dished bottom heads. Unit measures approximately 1,100mm diameter x 2,360mm straight side. Internal rated 0.5 bar/full vacuum design pressure at 150 deg.c. Unit includes top entry stainless steel 2-tier, 4-blade agitator with Jongia drive, 2.2kw 50/60hz motor through Siemens gearbox rated 14.54/1 ratio. Unit is mounted on (2) stainless steel side supports.
Location: Newton Aycliffe, UK
Stock #VB0007-48
2 X 20 litre double electric melter manufactured by TRANSVIS. Total volume 40 litres. Includes electric heat tracing. Each tanks has a conical bottom and approximate 450 mm diameter x 100 mm straight side and 300 mm cone height. Discharge diameter approximately 50 mm. Overall Dimensions 1350 x 900 x 1150mm high.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L0704-MISCTANK
Used approximately 4.5 litre stainless steel vertical tank. Internal approximately 150mm diameter X 250mm straight side. Has welded dished top and bottom heads.
Location: UK
Stock #U2402-18
Used vertical stainless steel storage tank with volume 20 l. Internal diameter 265 mm x length of straight side of wall 365 mm. Bottom conical with central discharge outlet. Top equipped with bolted stainless steel lid.
Location: Perry Poland Warehouse
Stock #U2402-19
Used vertical stainless steel storage tank with volume 20 l. Internal diameter 265 mm x length of straight side of wall 365 mm. Bottom conical with central discharge outlet. Top equipped with bolted stainless steel lid.
Location: Perry Poland Warehouse
Stock #U2415-4
Used vertical stainless steel rectangular melting tank with volume 29 l. Rectangular shape. Tank has internal dimensions: 326 mm x 326 mm x 280 / 278 mm depth (from the discharge outlet side). Discharge outlet at wall side, has diameter 25 mm and manually operated valve. Top covered with stainless steel lid. Tank has heating jacket equipped with electrical heater and thermostat. Working temperature of thermostat in range 15-70 C. Tank is mounted on mobile stainless steel supporting frame.
Location: Perry Poland Warehouse
Stock #U2212-3
Used vertical stainless steel storage tank with electrical heaters. Tank has internal dimensions: diameter 355 mm x depth 320 mm. Working volume 30 liters. Central bottom discharge with valve. Top bolted.
Location: PL
Stock #U2415-6
Used stainless steel vertical storage tank with volume 30 l. Tank has internal diameter 220 mm x lenght of straight side of wall 820 mm. Top, elipsoidal, bolted with two connections. Bottom elipsoidal, bolted, with side discharge outlet. Mounted on three stainless steel supports/legs.
Location: Perry Poland Warehouse
Stock #U2438-3
Used vertical stainless steel storage tank by Kates (PL). Tank has total volume about 44 l and working volume up to 30 l. Internal diameter 348 mm x length of straight side of wall 460 mm. Internal is rated for work on pressure from -1 bar up to 3 bar. Working temperature up to 150 C. Bottom elipsoidal, welded with central discharge outlet. Side and bottom walls are insulated and layered with stainless steel. Top elipsoidal, rised manually, bolted on 4 clamps. Has provision for mounting agitator. Tank has local stainless steel electric cabinet. Tank is mounted on 4 stainless steel legs with wheels.
Location: Perry Poland Warehouse
Stock #VB0007-49
Used Electric melter with GRUNDFOS circulation pump. Approximately 40 litres capacity. Stainless steel rectangular tank measures 400x400x250mm. Includes GRUNDFOS circulation pump, electric resistance, temperature regulator and mobile frame.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2249
Second hand jacketed, stainless steel, vertical mixing tank with total volume 50 liters working volume approx 35 liters internal dimensions: diameter 390 mm x length of straight side of wall 380 mm. Conical bottom with central discharge and valve. Jacketed side walls and bottom. In bottom part of bowl there are mounted two electric heaters. Open top. Tank has frame type agitator driven by el. motor and gearbox.
Location: PL
Stock #U1910-13
Used stainless steel vertical mixing tank with volume 50 l. Open top. Tank has top driven frame agitator by electric motor with 1.5 kW power. Mixer has homogenizing agitator as well, driven directly by electric motor 2.2 kW, 2860 rpm. Mixing chamber has jacket covering bottom of chamber up to 370 mm height and equipped with 2 electric heaters. Mixing chamber dimensions: 350 mm diameter X 650 mm hight. Bottom discharge.
Location: Perry Poland Warehouse
Stock #U2200-17
Used vertical storage tank designed in contact parts designed in stainless steel. Tank has working volume 50 liters, internal dimensions of tank: diameter 395 mm x length of straight site of wall 500 mm. Tank has open top with lid closed with fasteners. Tank has a flat bottom and discharge outlet at the side wall. Tank is mounted on carbon steel support with 3 carbon steel legs. Tank has also the place for mounting the liquid level mettering pipe.
Location: Perry Poland Warehouse
Stock #U2415-5
Used stainless steel vertical storage/buffer tank with total volume 50 l. Tank has internal diameter 300 mm x length of straight side of wall 700 mm. Open top, with clamp closed teflon lid. Tank has side wall connections with diameter 100 mm and welded pipe, at the angle to the bottom of the tank. On the opposite wall there is connection with diameter 95 mm and welded pipe, at the angle to the top of the tank. Tank has also side connection for mounting a level sensor.
Location: Perry Poland Warehouse
Stock #U2364-3
Used stainless steel boiling tank by Terlet (NL) with total volume 54 l and working volume about 45 l. Contact parts designed in stainless steel. Tank has internal diameter 450 mm x length of straight side of wall 340 mm. Bottom flat, with side wall discharge outlet equipped with manually operated valve. Top open, equipped with manually operated lid. Tank has bottom and side walls layered with heating jacket and thermal insulation. Inside the tank there is mounted bottom driven frame type agitator with side wall scrappers. Agitator is driven by el motor 0.37 kW, 1390 rpm, 230/400 V, 50 hz and gearbox. Tank is mounted on supporting stainless steel frame. There is also included with machine a perforated stainless steel basket .
Location: Perry Poland Warehouse
Stock #L1085-27
Used 150 litre stainless steel Ross open top trolley tanks. Units measure approximately 635mm diameter X 584mm deep to 75mm diameter outlet. Mounted on 4 wheel trolley base to give 560mm ground clearance. Top flange 555mm.
Location: UK
Stock #L1085-26
Used 60 litre Talleres Miralles open top trolley tanks. Units measure approximately 450mm diameter X 400mm deep. Flat radius bottom to 75mm diameter outlet. Mounted on 4 wheel trolley base to give 540mm brim height.
Location: UK
Stock #VB0007-33
Used stainless steel, vertical, jacketed mixing tank with a capacity of 60 litres. Vessel has a dished bottom. Has a tilting cover and bottom entry 3 blade agitator. Agitator is variable speed. Includes control panel. Mounted on a mobile frame.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2352-22
Used vertical stainless steel mixing tank with total volume 80 l. Working volume about 60 l. Tank has internal diameter 396 mm x length of straight side of wall 635 mm. Bottom elipsoidal, with central discharge outlet, with manually operated valve. Top cover half open. Tank is equipped with disc agitator driven through vari speed gearbox and el. motor 0.75 kW, 1410 rpm, 220/380 V, 50 hz EExeIIT3. Working rotation of agitator adjustable in range from 128 up to 1084 rpm. Tank is mounted on 5 stainless steel legs, equipped with wheels.
Location: Perry Poland Warehouse
Stock #VL1473-05
Used Giusti approximately 70 litre capacity stainless steel vertical mixing vessel. Vessel has clamped dished top and bolted flanged bottom heads. Approximately 450mm diameter x 300mm straight side. Internal rated 2.76 bar design pressure at 50 deg.c. Vessel is mounted on (3) stainless steel legs. Unit has bottom entry Nimix type 350-S60-EF agitator with approximately 1.1kw drive.
Location: Newton Aycliffe, UK
Stock #VL1473-06
Used Giusti approximately 70 litre capacity stainless steel vertical mixing vessel. Vessel has clamped dished top and bolted flanged bottom heads. Approximately 450mm diameter x 300mm straight side. Internal rated 2.76 bar design pressure at 50 deg.c. Vessel is mounted on (3) stainless steel legs. Unit has bottom entry Nimix / Chemineer agitator with approximately 1.1kw drive.
Location: Newton Aycliffe, UK
Stock #L0991-08
Used Chemap 70 litre stainless steel horizontal vessel. Internal approximately 400mm diameter X 450mm straight side. Has welded dished heads. Internal rated 0 bar pressure at 150 DEGC. Includes Netzsch Mohno-Pumpen vertical immersion pump rated approximately 5-20 L/M at 1-6 bar pressure depending on application. Direct driven by new 0.37 kw 230-400 volt 3/50 680 rpm motor. Mounted on (2) stainless steel saddles.
Location: Perry England Warehouse
Stock #UG6333
Used vertical stainless steel storage tank with volume 70 l. Internal diameter 395 mm x length of straight side of wall 580 mm. Bottom elipsoidal, with two discharge outlets - central without a valve and another with valve (asymetric). Top open, with bolted flat lid.
Location: Poland
Stock #U2329-3
Used vertical mixing tank with total volume 80 l and working volume about 60 l. Tank has internal diameter 495 mm x length of straight side of wall 460 mm. Top bolted with stainless steel cover, which is half open. Tank is equipped with propeler type agitator driven directly by el. motor 0,2 kW, 900 rpm, 220/380 V, 50 hz, Ex design (Ex-d IP45). Discharge outlet at the side wall , with manually operated valve. Tank has carbon steel heating jacket with two electrical heaters and control panel in Ex design. Heating jacket has perforations. Mounted on three carbon steel legs with wheels.
Location: Perry Poland Warehouse
Stock #L1315-01
Used Sapphire Engineering approximately 90 litre capacity 316L stainless steel vertical mixing vessel. Unit has welded dished top and bottom heads. Internal rated 3 bar/ full vacuum design pressure at -10 to 135 deg.c. Unit has bottom entry 4-blade agitator with electric motor. Unit mounted on wheels.
Location: EU
Stock #U2200-16
Used vertical storage tank designed in contact parts designed in stainless steel. Tank has working volume 100 l. Internal dimensions of tank: diameter 500 mm x length of straight site of wall 600 mm. Tank has open top with lid closed with fasteners. Bottom has central discharge outlet. Tank is mounted on carbon steel support with 3 carbon steel legs. Tank has also the place for mounting the liquid level mettering pipe.
Location: Perry Poland Warehouse
Stock #U2093-18
Used vertical open top storage stainless steel tank with total volume 100 litres. Tank has a jacket and insulated. Internal dimenssions diameter 550 mm, height 480 mm. Shipping dimenssions: diameter 820 mm height 900 mm. Unit is mounted on 3 legs and has a bottom side discharge.
Location: Perry Poland Warehouse
Stock #L1373-09
Used approximately 100 litre stainless steel vertical mixing vessel. Unit measures approximately 700mm diameter x 250mm straight side. Top 0.37kw motor but no agitator. Has welded dished top and conical bottom heads. Mounted on legs with wheels.
Location: EU
Stock #L1373-14
Used approximately 100 litre stainless steel vertical mixing vessel. Unit measures approximately 700mm diameter x 250mm straight side. Bottom entry impellor type agitator driven by a 0.37kw 3/50 motor. Has welded dished top and bottom heads. Mounted on legs with wheels.
Location: EU
Stock #L1273-22
Used approximately 100 litre stainless steel silicon carbide lined vertical mixing vessel. Unit measures approximately 500mm diameter X 500mm straight side. Has flat hinged lid and welded dished bottom head. Unit includes side clamped 1 tier 3 blade propellor type agitator driven by a 0.25 kw 670rpm 3/50 motor. Unit is mounted on (3) legs.
Location: Perry England Warehouse
Stock #L1332-04
Used approximately 100 litre stainless steel mixing vessel. Unit has welded dished top and bottom heads. Unit measures approximately 500mm diameter x 450mm straight side. Unit has bottom entry stainless steel impellor type agitator but no drive. Mounted on stainless steel mobile frame.
Location: Perry England Warehouse
Stock #VB0007-144
Used POLIVINIL mild steel vessel with spray gun-Type PD-Total capacity : 100 litre-Useful volume : 80 litre-Vessel dimension : 400 x 600 x H 450 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2352-19
Used, mobile, vertical stainless steel mixing tank by Kates (PL) type VE-47715, with working volume 100 l. Total volume about 120 l. Tank has internal diameter 450 mm x 710 mm length of straight side of wall. Bottom welded, elipsoidal with central discharge outlet. Top bolted, has inspection manway with diameter 150 mm and bolted lid. Side walls and bottom are layered with thermal insulation. Tank is equipped with anchor agitator driven by gearbox. Missing electrical motor. Tank is mounted on four stainless steel legs with wheels.
Location: Perry Poland Warehouse
Stock #L1555-05
Used PSV Fabrications approximately 100 litre capacity 316L stainless steel jacketed vessel. Unit measures approximately 600mm diameter x 600mm straight side. Has clamped dished top with hinged section and welded conical bottom. Internal rated atmospheric design pressure at 80 deg.c. Unit has stainless steel external jacket rated 4 bar/full vacuum design pressure at 80 deg.c.
Location: Newton Aycliffe, UK
Stock #L1525-08
Used FIB Industriele Bedrijuen BV approximately 106 litre stainless steel vertical mixing vessel. Unit has bolted flanged top and welded dished bottom. Unit measures approximately 400mm diameter x 400mm straight side. Internal rated 3 bar/full vacuum design pressure at 135 deg.c. Unit includes bottom entry stainless steel disc type agitator driven by Jongia model LEM30 drive with 1.5kw motor and Siemens gearbox rated 2.05/1 ratio. Unit is mounted in a stainless frame.
Location: Newton Aycliffe, UK
Stock #UG6339
Used stainless steel vertical mixing tank by HEV (Poland) with a total capacity of 130 l. Working capacity ranging from 10 l. to 110 l. Cone-shaped tank with central discharge outlet equipped with manually operated valve. The tank is equipped with a heating jacket made of stainless steel with a capacity of 50 liters, and in its lower part there are 5 electric heaters with a total power of 5 kW. The top cover is half screwed on and half opened by hand. The tank is equipped with a ribbon agitator top driven by a gearbox and electric motor with a power 1.5 kW. The agitator has a constant speed of 15 rpm. The tank is mounted on a mobile frame made of stainless steel with ele control. Technical documentation in Polish is available in the set with the device.
Location: POL
Stock #U2411-17
Used vertical stainless steel AISI 316L storage tank with a total capacity of 110 l. Tank has internal diameter 400 mm and length of straight side of wall 900 mm. Welded dished upper head equipped with an inspection manhole with a cover with a diameter of 200 mm and 2 connections. Welded dished bottom head with a central discharge outlet with an internal diameter of 65 mm. Tank is mounted on three lugs.
Location: Perry Poland Warehouse
Stock #U2418-13
Used vertical stainless steel mixing tank with total volume 120 l. Internal diameter 500 mm x length of straight side of wall 615 mm. Top open, has bolted stainless steel cover. Bottom elipsoidal, with central discharge outlet and filtering stainless steel screen. Tank is equipped with bottom mounted pipe for feeding gase/liquid and bottom located stainless steel coil. Top mounted propeller agitator, driven directly by el motor 0,37 kW, 920 rpm, 230/400 V, 50 hz. There is also top mounted, welded to the wall, perforated stainless steel coil with connection. Zbiornik zamontowany na trzech nogach ze stali ko.
Location: Perry Poland Warehouse
Stock #RG8025
Refurbished mixing vessel manufactured by Perfa Type CKA 12 with a capacity of 120 litres, internal copper, unit is jacketed and is rated 10 bar working pressure. Suitable for soft caramels and similar.
Location: EUROPE
Stock #VB0007-34
Used stainless steel cylindrical, vertical, jacketed mixing tank with a capacity of 130 litres. Vessel has a dished bottom and bottom outlet. Includes tilting cover. Unit has a 2 blade agitator with variable speed drive and electrical control panel. Mounted on a mobile frame.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1149-01
Used Giusti approximately 135 litre capacity stainless steel jacketed hemispherical mixing pan. Unit measures approximately 650mm diameter X 200mm straight side. Has hinged flat top and welded dished bottom heads. External jacket rated 40 psi (2.75 bar). Includes top entry stainless steel scrape surface gate type agitator with a Dynatork air motor. Unit is mounted on (4) legs on mobile base.
Location: Perry England Warehouse
Stock #U2422-16
Used mobile vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 136 l by Diessel GMBH & Co. (Germany) type 100 L. Tank has a working volume of 100 l and is designed to operate at pressures ranging from -1 to 3 bar and temperatures up to 150 C. Internal dimensions: diameter 544 mm, length of straight wall line 480 mm. Machine has open hinged dished top, bolted with clamps. The top equipped with an sight glasses for viewing the inside of pressure tank with an internal diameter of 125 mm and 6 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a SUDMO valve type SVP Fill with PTFE bellows. Machine is mounted on 4 legs equipped with wheels. The equipment includes technical documentation of the manufacturer and UDT in polish.
Location: Perry Poland Warehouse
Stock #L1070-45
Used approximately 140 litre stainless steel jacketed mixing vessel. Internal approximately 550mm diameter X 600mm straight side. Has clamped hinged dished top and welded dished bottom heads. Includes external heating jacket. Has offset 3-blade pitched paddle agitator direct driven by 1.1 kW 220/380 volt 3/50 2800 rpm motor. Mounted on stainless steel frame. Last used for mixing cosmetics.
Location: Perry England Warehouse
Stock #L1332-03
Used approximately 150 litre stainless steel mixing vessel. Unit has welded dished top and bottom heads. Unit measures approximately 550mm diameter x 570mm straight side. Internal rated 1.5 bar/Full Vacuum working pressure. Unit has bottom entry stainless steel impellor type agitator but no drive. Unit is mounted on stainless steel mobile frame.
Location: Perry England Warehouse
Stock #L1491-04
Used approximately 150 litre stainless steel storage vessel. Unit measures approximately 595mm diameter x 500mm straight side. Has flat hinged top and welded dished bottom heads. Mounted on (3) wheels. Provision for bridge mounted agitator.
Location: Perry England Warehouse
Stock #L1373-21
Used approximately 150 litre stainless steel vertical mixing vessel. Unit measures approximately 550mm diameter x 600mm straight side. Bottom entry impellor type agitator with no motor. Has welded dished top and bottom heads. Mounted on legs with wheels.
Location: EU
Stock #L1339-01
Used Quinn Engineers Ltd approximately 150 litre stainless steel mobile vertical mixing vessel. Unit has welded dished top and bottom heads. Unit measures approximately 550mm diameter x 600mm straight side. Internally rated Full vacuum/1.5 bar pressure at 150 deg.c. Unit has bottom entry stainless steel impellor type agitator but no drive. Mounted on stainless steel mobile frame.
Location: Perry England Warehouse
Stock #VB0001-21
Used vertical 150 litre stainless steel electric melter. Tank diameter 600mm x 700 mm length. 3 electric heating 3Kw - 220/380 Volts. Double jacketed. Dished Bottom.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VB0050-01
Used BIONAZ Melter on mobile frame n ° 3568 in 316 stainless steel, volume 150 litres with cover-Vertical cylindrical tank curved bottom, with insulated double jacket-The emptying is done by tilting the tank with flywheel and worm-Internal dimensions of the tank : Ø 585 x height 520 + 80 = 600 mm-Approximate external dimensions: 1500 x 850 mm x height 1150 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1271-21
Used Sapphire Engineering approximately 150 litre capacity vertical 316L stainless steel receiver vessel. Unit has clamped dished top and welded dished bottom heads. Internal rated 3.4 bar/full vacuum design pressure at -28 to 177 deg.C. Unit mounted on 4 stainless steel legs with wheels.
Location: Perry England Warehouse
Stock #L1339-02
Used Quinn Engineers Ltd approximately 150 litre stainless steel mobile vertical mixing vessel. Unit has welded dished top and bottom heads. Unit measures approximately 550mm diameter x 600mm straight side. Internally rated Full vacuum/1.5 bar pressure at 150 deg.c. Unit has bottom entry stainless steel impellor type agitator but no drive. Mounted on stainless steel mobile frame.
Location: Perry England Warehouse
Stock #VL1205-07
Used approximately 151 litre stainless steel vertical storage vessel. Internal approximately 450mm diameter X 950mm straight side. Has welded dished top and bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #U2093-17
Used vertical mixing stainless steel tank with total volume 160 litres. Tank has jacket and insulation. Includes gearbox. No motor. Has hinged top cover. Unit is mounted on 4 legs and has a bottom discharge. Shipping dimensions: 800 mm width, 1000 mm length, 1600 mm height.
Location: Perry Poland Warehouse
Stock #U1616-10
Used stainless steel jacketed mixing tank manufactured in England by "Ilford". Turbine agitator. Agitator speed approximately 70 rpm. 160 litres volume. Includes plate (40 X 90 cm) stainless steel Alfa Laval model P2VXL 6 M2 surface heat exchanger. Mounted on frame.
Location: Perry Poland Warehouse
Stock #L1373-12
Used approximately 160 litre stainless steel vertical mixing vessel. Unit measures approximately 900mm diameter x 250mm straight side. Bottom entry impellor type agitator driven by a 0.37kw 3/50 motor. Has welded dished top and conical bottom heads. Mounted on legs with wheels.
Location: EU
Stock #L1373-25
Used approximately 160 litre stainless steel vertical storage vessel. Unit measures approximately 600mm diameter x 550mm straight side. Has welded dished top and bottom heads. Mounted on legs with wheels.
Location: EU
Stock #U2402-9
Used stainless steel vertical mixing tank with total volume 160 l. Polish made. Tank has no pressure heating/cooling jacket. Mixing by stainless steel top mounted propeller agitator driven by gearbox and electric motor 0.4 kW, 1300 rpm, 220/380 V, 50 hz. Internal dimensions: diameter 560 mm x 660 mm height. Shipping dimensions: diameter 1300 mm x height 1600 mm x weight 150 kg.
Location: Perry Poland Warehouse
Stock #U2402-10
Used stainless steel vertical mixing tank with total volume 160 l. Polish made. Tank has no pressure heating/cooling jacket. Mixing by stainless steel top mounted propeller agitator driven by gearbox and electric motor with power about 0.4 kW. Internal dimensions: diameter 560 mm x 660 mm height. Shipping dimensions: diameter 1300 mm x height 1600 mm x weight 150 kg.
Location: Perry Poland Warehouse
Stock #VB0007-46
Used Stainless steel vessel - 175 litres - with internal coil jacket-Stainless steel vessel Ø 500 x 900 mm-Cylindrical, Vertical, Dishaed, on 3 feet-Bolted flat cover-Ø 25 mm outlet-With electrical resistance 6 Kw, mone stainless steel interior coil and copper exterior coil-With electric cabinet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1373-11
Used approximately 180 litre stainless steel vertical mixing vessel. Unit measures approximately 650mm diameter x 550mm straight side. Top entry 1 tier 3 blade pitched paddle type agitator with no motor. Has welded dished top and conical bottom heads. Mounted on legs with wheels.
Location: EU
Stock #U2292-8
Second hand vertical stainless steel mobile tank by Nikron B.V. (Netherlands) with total volume 200 l. Tank has internal diameter 585 mm x straight side of wall 700 mm. Internal diameter of the top 450 mm. Top is equipped with stainless steel lid, mounted on rising arm with shaft. Lid had been rised pneumatically, but currently accutators are missing. At the lid there is mounted shaft of agitator, but missing a drive. Lid is mounted to the tank on 8 stainless steel clamps. Tank doesn't have bottom outlet. Side walls are insulated and layered with stainless steel. In upper part of side walls there is a heating coil, working pressure up to 2.5 bar. Tank can work on pressure -1 bar. Mounted on stainless steel mobie platform.
Location: PL
Stock #L1421-07
Used Mcmillan approximately 200 litre stainless steel vertical storage vessel. Internal approximately 600mm diameter x 1000mm straight side. Has welded dished top and bottom heads. Internal rated 1.5 bar/full vacuum design pressure at 20 degC. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1373-32
Used approximately 200 litre stainless steel vertical storage vessel. Unit measures approximately 600mm diameter x 700mm straight side. Has clamped dished top and welded flat bottom heads. Mounted on wheels.
Location: EU
Stock #L1373-29
Used approximately 200 litre stainless steel vertical storage vessel. Unit measures approximately 600mm diameter x 700mm straight side. Has clamped dished top and welded flat bottom heads. Mounted on wheels.
Location: EU
Stock #L1373-04
Used approximately 200 litre stainless steel vertical mixing vessel. Unit measures approximately 1000mm diameter x 250mm straight side. Top entry 1 tier 3 blade propellor type agitator driven by a 0.37kw 1410rpm 3/50 motor. Has welded dished top and conical bottom heads. Mounted on legs with wheels. Also includes bottom mounted pump.
Location: EU
Stock #VB0007-55
Used Stainless steel mixing tank-Double jacket - 200 useful litre-Tilting cover-ADMIX stirring 3 stages with 3 blades-Motor : 1.5 kw - Hp 2 - Rpm 1455 - 415 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1315-07
Used Sapphire Engineering approximately 200 litre capacity 316L stainless steel vertical mixing vessel. Unit has clamped dished top and welded dished bottom heads. Internal rated 3 bar + static head design pressure at -10 to 135 deg.c. Unit has bottom entry drive but currently no agitator fitted. Unit mounted on wheels.
Location: EU
Stock #L1315-05
Used Sapphire Engineering approximately 200 litre capacity 316L stainless steel vertical mixing vessel. Unit has clamped dished top and welded dished bottom heads. Internal rated 3 bar + static head design pressure at -10 to 135 deg.c. Unit has bottom entry 4-blade agitator with electric motor. Unit mounted on wheels
Location: EU
Stock #L1315-04
Used Sapphire Engineering approximately 200 litre capacity 316L stainless steel vertical mixing vessel. Unit has clamped dished top and welded dished bottom heads. Internal rated 3 bar + static head design pressure at -10 to 135 deg.c. Unit has bottom entry 4-blade agitator with electric motor. Unit mounted on wheels
Location: EU
Stock #L1315-03
Used Sapphire Engineering approximately 200 litre capacity 316L stainless steel vertical mixing vessel. Unit has clamped dished top and welded dished bottom heads. Internal rated 3 bar + static head design pressure at -10 to 135 deg.c. Unit has bottom entry drive but currently no agitator fitted. Unit mounted on wheels
Location: EU
Stock #VB0007-86
Used Set of 2 Compartmentalized and Communicating Stainless Steel Storage Tanks-Including:- 1 stainless steel tank 150 litre approximately- Internal Dimensions : Ø 600 mm X 410 mm / 440 mm-- 1 stainless steel tank 60 litre approximately- Internal Dimensions : Ø 400 mm X 550 mm X 340 mm / 225 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2288
Second hand stainless steel tank with total volume 220 l. Tank has internal diameter 820 mm x length of straight side of wall 170 mm. Top elipsoidal and welded to side walls. Equipped with inspection manway with bolted lid with diameter 295 mm. Bottom conical with high of cone 700 mm. Central bottom discharge outlet with diameter 100 mm. All walls are insulated and layered with stainless steel. Tank is mounted on stainless steel frame and three tension cells.
Location: PL
Stock #L1180-07
Used approximately 226 litre stainless steel vertical jacketed vessel. Internal approximately 600mm diameter X 800mm straight side. Has clamped dished top and welded dished bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #U2418-19
Used vertical stainless steel storage tank with total volume 240 l. Internal diameter 620 mm x length of straight side of wall 740 mm. Top open, has bolted stainless steel cover. Bottom elipsoidal, with central discharge outlet.
Location: Perry Poland Warehouse
Stock #U2239-16
Used vertical storage tank with total volume 240 l. Internal dimensions: diamater 560 mm x length 980 mm. Tank has open top and flat bottom. Side discharge with valve. Tank is mounted on three stainless steel legs.
Location: PL
Stock #U2422-14
Used mobile vertical stainless steel AISI 316L aseptic pressure mixing tank with a total capacity of 240 l by Schwarte-Milfor Sp. z o. o. (Poland) type UMJP-160 l. Tank has a working volume of 160 l and is designed to operate at pressures ranging from -1 to 3 bar and temperatures up to 120 C. Internal dimensions: diameter 680 mm, length of straight wall line 530 mm. Machine has open hinged dished top, bolted with clamps. The top equipped with an inspection manway with an internal diameter of 150 mm and 6 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA. At the bottom, a NovAseptic magnetic stirrer type GMP 500 is installed, driven by gears (ratio i=7) and an electric motor with a power of 0.25 kW, 2720 rpm, 50 Hz. The agitator operates in the speed range from 80 to 410 rpm and is suitable for mixing liquid products with a viscosity of up to 800 cP. Machine is mounted on 4 legs equipped with wheels. The device is equipped with an ele. cabinet with a product temperature display and a stirrer speed display with a potentiometer for its adjustment. The equipment includes full technical documentation of the manufacturer and UDT in polish.
Location: Perry Poland Warehouse
Stock #L1183-19
Used approximately 250 litre stainless steel vertical vessel. Stainless steel 316 (1,4401) vertical liquid storage tank / receiver with bolt dish top & welded dish bottom, 460 X 50mm sight / level glass on straight side. Rated 2,8 bar. Vessel measures 0,6M diameter X 0,78M H + 100 for bottom dish & 150mm for top dish + flanges. Openings top dish: 2 X 25mm, 1 X 75mm, 1 X 150mm flanges, 1 X 150mm pad, 1 X 200mm pad 1 X 100mm sight glass, centre bottom outlet: 50mm. Unit supported / mounted by 4 X side brackets / lugs positioned approximately 370mm from top dish split line lower face of brackets with bolt on/off pipe legs giving approximately 180mm floor clearance from underside of bottom outlet.
Location: Perry England Warehouse
Stock #RG9676
New stainless steel jacketed chocolate mixing vessel manufactured by MASSA type TCX Mikro 2.5. Capacity 250 kg. Vessel is jacketed. Walls insulated, detachable stainless steel external casing, scraper for the bottom + the walls, geared motor 0,33 kW, heating via resistances 1,8 kW, water pump 1 ½“, with 1 load door with safety switch, 2 lateral connections for product discharge, over pump, digital hot water adjustment, digital product thermometer, control panel for stirrer, control panel for pump, space required 1020 x 820 x 1410 mm high, please indicate required cable length and plug when ordering.
Location: Europe
Stock #L1296-02
Used approximately 250 litre vertical stainless steel mixing vessel. Internal approximately 630mm diameter x 800mm straight side. Has hinged flat top and welded flat bottom heads. Has top mounted 2 tier 2 blade pitched paddle type agitator driven by a 1/1.4kw 400 volt 3 phase 50 hertz 1430/2820 rpm motor via a gearbox. Also includes side mounted pump driven by a 1.55kw 230/400 volt 3/50 574-2820 rpm motor. Mounted on a stainless steel frame.
Location: Perry England Warehouse
Stock #L1555-04
Used Braby Ltd approximately 250 litre 316L stainless steel vertical mixing vessel. Unit measures approximarely 800mm diameter x 400mm straight side. Unit has welded dished top and bottom heads. Internal rated 6 bar/full vacuum design pressure at 150 deg.c. Unit has bottom entry agitator driven by 0.28kw magnetic drive. Unit mounted on (4) legs.
Location: Newton Aycliffe, UK
Stock #RG9206
Used 250 litre polished stainless steel 316 (1,4401) vertical liquid storage tank / receiver with bolt dish top & Cone. Vessel / cylinder measures 0,76M I/diameter X 0,70M H + 0,25M for Cone base + 150mm for top dish + flanges. Openings top dish: 1 X 25mm, 1 X 40mm, 2 X 50mm, 1 X 150mm pad, 1 X 300mm diameter manway with bolt on / off lid incorporating 1 X 50mm & 1 X 75mm flanges, centre bottom outlet: 50mm. Unit supported / mounted by 4 X stainless steel side brackets / lugs positioned approximately 620mm from top dish split line lower face of brackets with bolt on/off pipe legs giving approximately 180mm floor clearance from lowest Point of bottom outlet
Location: Perry England Warehouse
Stock #U2281-5
Used stainless steel, open top mobile tank with working volume about 250 l. Tank has internal dimensions width 710 mm x length 1065 mm x 710 mm depth. Tank is mounted on 3 rubber wheels. Tank doesnt has an outlet discharge.
Location: Perry Poland Warehouse
Stock #U2418-17
Used vertical stainless steel storage tank with total volume 260 l. Internal diameter 650 mm x length of straight side of wall 780 mm. Top open, has bolted stainless steel cover. Bottom elipsoidal, with central discharge outlet.
Location: Perry Poland Warehouse
Stock #U2200-18
Used vertical storage stainless steel tank on mobile wheels by Wessington Cryogenics Ltd. (England). Type PV200. Tank had been designed for work on gases under the pressure. Total volume 280 l. Rated for work on pressure up to 3 bar at temperature up to 196C. Dimensions of tank: diameter 640 mm x length of straight site of wall 880 mm. Tank has welded top and bottom. At the top there is a 50 mm connection for bolted feeding/discharge valves device.
Location: Perry Poland Warehouse
Stock #U1578-9
Used 280 liters total volume stainless steel boiler tank. Working volume 200 liters. 1 square meter surface of the heat. Steam working pressure on jacket 2.5 bar. Temperature 100 C. Has a heating jacket. Overall dimentions 1790 mm length, 1012 mm width, 1444 mm height. Weight 365 kg. New 1984.
Location: Perry Poland Warehouse
Stock #U2364-1
Used stainless steel melting tank with working volume 300 l. Tank has internal diameter 1000 mm x length of straight side of wall 360 mm. Bottom conical with central discharge outlet, equipped with manually operated valve. Bottom and side walls are covered with stainless steel heating jacket. Tank is equipped with stainless steel melting grate and manually rised top cover designed in stainless steel. Working temperature up to 50C. Tank is mounted on 3 stainless steel legs. Shipping dimensions: L 1400 mm x D 1400 mm x H 1600 mm.
Location: Perry Poland Warehouse
Stock #L1271-37
Used HM Rustfri Design jacketed tank, stainless steel, working capacity 79.37 gallon (300 liter), working jacket pressure 40.5 psi (2.7 bar) at 32-194 deg. F (0-90 deg. C). Test jacket pressure rated for 53.25 psi (3.55 bar), 32-302 deg. F (0-150 deg. C). Max 81-404 rpm propeller agitator driven via an Ekato fluid FGL-25D gearbox by a sew euro drive 1.13 HP/0.75 kW-230/400volt/50cycle/3PH motor. On 2 legs.
Location: Perry England Warehouse
Stock #VB0007-164
Used Electric agitated stainless steel melter 300 litre-Cylindrical tank Ø 700 x 800 mm, vertical, double jacket on 4 feet-Half-moon tilting cover-Agitator 3 stages of 2 blades + 1 baffle-Gear motor : 0.75 kw - Hp 1 - Rpm 2665/433 - 3x 230/400 volts-2 electric heaters of 4.5 kw each- With electrical cabinet-1 wash head
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2418-18
Used vertical stainless steel storage tank with total volume 250 l. Internal diameter 635 mm x length of straight side of wall 785 mm. Top open, has bolted stainless steel cover. Bottom elipsoidal, with central discharge outlet.
Location: Perry Poland Warehouse
Stock #U2396-1
Used stainless steel vertical mixing tank by Bionaz (FR) with total volume 440 l and working volume 300 l. Tank has internal diameter 1120 mm x length of straight side of wall 510 mm. Mixing chamber has shape truncated cone with elipsoidal bottom. Top open, with both sides covered with stainless steel safety framework and manually operated covers. Tank is layered with stainless steel heating jacket. Discharge via tilt, operated hydraulicaly. Missing hydraulic device. Tank is equipped with stainless steel anchor agitator, driven by el. motor 1.5 kW, 1400 rpm, 220/380 V, 50 HZ via vari-speed gearbox. Working rotation of agitator adjustable in range from 10.5 up to 61 rpm. Tank is mounted on two stainless steel supports and has local control panel. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2396-2
Used stainless steel vertical mixing tank by Bionaz (FR) with total volume 440 l and working volume 300 l. Tank has internal diameter 1120 mm x length of straight side of wall 510 mm. Mixing chamber has shape truncated cone with elipsoidal bottom. Top open, with both sides covered with stainless steel safety framework and manually operated covers. Tank is layered with stainless steel heating jacket. Discharge via tilt, operated hydraulicaly. Missing hydraulic device. Tank is equipped with stainless steel anchor agitator, driven by el. motor 1.5 kW, 1400 rpm, 220/380 V, 50 HZ via vari-speed gearbox. Working rotation of agitator adjustable in range from 10.5 up to 61 rpm. Tank is mounted on two stainless steel supports and has local control panel. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #L1524-01
Used Shanhai Kaiquan model KQ-300L approximately 300 litre 304 stainless steel hemispherical jacketed mixing vessel. Internal approximately 850mm diameter X 300mm straight side. Has hinged flat top and welded hemispherical bottom heads. Has stainless steel jacket on hemispherical bottom no ratings present. Includes anchor agitator with scrapers direct driven by 1.5 kW 415 volt 3/50 1400 rpm motor and gearbox at 36 rpm. Mounted on frame. New 2017
Location: Newton Aycliffe, UK
Stock #L1524-02
Used approximately 300 litre stainless steel hemispherical mixing vessel. Internal approximately 900mm diameter X 450mm straight side. Has hinged dished top and welded hemispherical bottom heads. Includes 3 tier 4 blade pitched paddle type agitator mounted in anchor direct driven by an approximate 1.5 kW 3/50 motor. Mounted on frame.
Location: Perry England Warehouse
Stock #L1240-01
Used approximately 300 litre stainless steel jacketed mixing vessel. Internal approximately 680mm diameter X 700mm straight side. Has bolted flat hinged lid and welded conical bottom heads. Includes external heating jacket. Has centre top entry 1 tier 4 blade pitched paddle type agitator (requires a shaft) direct driven by 0.12 kW 230/400 volt 3/50 1380/196 rpm motor. Includes Endress & Hauser type Promass F flowmeter. Includes local controls. Mounted on stainless steel mobile frame. Also includes top entry agitator and motor but requires a shaft.
Location: Perry England Warehouse
Stock #VB0007-161
Used RAYNERI stainless steel mixing tank 330 litre-Type CS40SE-Cylindrical Ø 540 x 1350 mm tank, vertical, conical bottom height 380 mm, on 3 feet-Dissolver agitatior-Motor: 5.5 kw - Hp 7.5 - Rpm 1435 - 3x 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1027-01
Used Websters approximately 344 litre 316L polished stainless steel vertical agitated vessel. Unit measures approximately 700mm diameter X 600mm straight side. Has welded dished top and bottom heads. Internal rated 3.5 bar/full vacuum design pressure at 150 deg.C. Includes bottom entry 4-blade stainless steel agitator with GAST air driven motor and gearbox. Unit is mounted on stainless steel mobile frame.
Location: Perry England Warehouse
Stock #L1027-02
Used Webster approximately 344 litre 316L polished stainless steel vertical agitated vessel. Unit measures approximately 700mm diameter X 600mm straight side. Has welded dished top and bottom heads. Internal rated 3.5 bar/full vacuum design pressure at 150 deg.C. Includes bottom entry 4-blade stainless steel agitator with GAST air driven motor and gearbox. Unit is mounted on stainless steel mobile frame.
Location: SPAIN
Stock #L1093-10
Used approximately 380 litre capacity stainless steel vertical storage vessel. Internal approximately 780mm diameter X 800mm straight side. Has hinged top and welded flat bottom heads. Mounted on a frame with wheels.
Location: Perry England Warehouse
Stock #U2415-3
Used, vertical stainless steel, storage tank with volume 400 l. Tank has internal diameter 448 mm x lenght of straight side of wall 700 mm. Bottom discharge through pump, driven by el motor 0.5 kW. Tank is mounted on stainless steel supporting platform on four wheels.
Location: Perry Poland Warehouse
Stock #U2379-4
Used vertical jacketed stainless steel tank by Schwarz (DE) with homogenizing agitator Ytron. Tank has internal diameter 790 mm x length of straight side of wall 870 mm. Bottom elipsoidal, with central discharge outlet, equipped with manually operated valve. Total volume about 450 l, working volume about 400 l. Tank has bottom and side walls jacketed. Jacket has volume 53 l and is rated for work on pressure 2.5 bar at temperature up to 138 C. Top open, with mounted homogenizing axial jet stream agitator by Ytron (DE) type Y 5.50 FC-2/VM-10-III, driven directly by el motor 5.5 kW, 2855 rpm, 380-420V, 50 hz. Tank is mounted on 3 stainless steel legs and is equipped with three tension cells. Last time machine was used in cosmetic industry.
Location: Perry Poland Warehouse
Stock #U2294-8
Used stainless steel rectangular storage tank. Tank has internal dimensions: L 1150 mm x W 805 mm x height of straight side of the wall 380 mm. Tank has top and bottom welded. Bottom conical shape, with central discharge outlet. Top has central inspection manway with diameter 195 mm and with bolted lid. Tank is mounted on four stainless steel legs with mobile wheels. Shipping dimensions: L 140 cm x W 81 cm x H 120 cm.
Location: PL
Stock #U2418-14
Used vertical stainless steel mixing tank with total volume 400 l. Internal diameter 720 mm x length of straight side of wall 785 mm. Top open, has bolted stainless steel cover. Bottom elipsoidal, with central discharge outlet. Tank is equipped with bottom mounted nozzle for feeding gase into the liquid. Tank has top mounted propeller agitator, driven directly by el motor 0,37 kW, 1370 rpm, 230/400 V, 50 hz. There is also top mounted, welded to the wall, perforated stainless steel coil with connection.
Location: Perry Poland Warehouse
Stock #L1290-01
Used approximately 400 litre stainless steel vertical storage vessel. Unit measures approximately 800mm diameter x 1300mm straight side x 400mm conical bottom. Unit has an open top and a welded conical bottom head.
Location: Perry England Warehouse
Stock #L1072-15
Used Skerman approximately 400 litre stainless steel jacketed pan. Internal approximately 900 mm diameter X 600 mm straight side. Unit has external stainless steel jacket rated 40 psi design pressure. Has open top and welded dished bottom head. Unit is a tilt to discharge design. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #U2418-15
Used vertical stainless steel mixing tank with total volume 450 l. Internal diameter 820 mm x length of straight side of wall 795 mm. Top open, has bolted stainless steel cover. Bottom elipsoidal, with central discharge outlet. Tank is equipped with bottom mounted nozzle for feeding gase into the liquid. Tank has top mounted propeller agitator, driven directly by el motor 0,37 kW, 1370 rpm, 230/400 V, 50 hz. There is also top mounted, welded to the wall, perforated stainless steel coil with connection.
Location: Perry Poland Warehouse
Stock #L1194-13
Used approximately 465 litre capacity stainless steel vertical storage vessel. Internal approximately 1000mm diameter X 770mm straight side. Has open top and welded flat bottom heads. Mounted on a frame with wheels.
Location: Perry England Warehouse
Stock #L1093-08
Used approximately 465 litre capacity stainless steel vertical storage vessel. Internal approximately 1000mm diameter X 770mm straight side. Has hinged flat top and welded flat bottom heads. Mounted on a frame with wheels.
Location: Perry England Warehouse
Stock #L1093-09
Used approximately 465 litre capacity stainless steel vertical storage vessel. Internal approximately 1000mm diameter X 770mm straight side. Has open top and welded flat bottom heads. Mounted on a frame with wheels.
Location: Perry England Warehouse
Stock #VB0001-15
Used stainless steel vertical tank 470 litres on stainless steel mobile frame. Manufacturer CSC. Top opening : Ø 210 mm. Outlet on the bottom. Dimensions : 900 mm x 1500 mm x H. 1650 mm.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2017-9
Used stainless steel, rectangular storage tank with working volume 500 Liters. Tank has dimensions: width 700 mm x length 800 mm x height 1000 mm. Bottom side discharge with valve. Tank is adjusted for transport by the fork lift. Shipping dimensions: length 770 mm x width 950 mm x height 1300 mm x weight 166 kg. New 2001. No technical documentation included.
Location: Perry Poland Warehouse
Stock #U2239-11
Used rectangular mobile tank with total volume 500 l. Tank is designed in stainless steel and is mounted on four wheels. Internal dimensions (bottom/top) : width 840/1060 mm x length 1000/1380 mm x depth 440 mm. Bottom discharge with valve.
Location: PL
Stock #U2208-1
Used vertical stainless steel storage tank with volume 500 l. Tank has diameter 1000 mm x height of straight side of the wall 530 mm. Top welded with cental manway diameter 400 mm. Bolted lid. Bottom conical with central discharge, equipped with valve. Depth of conic 300 mm. Tank is mounted on stainless steel frame and has supports for work with forklift.
Location: Perry Poland Warehouse
Stock #L1178-21
Used T.musk Engineering approximately 500 litre vertical stainless steel jacketed vessel. Internal approximately 1000mm diameter X 650mm straight side. Internal rated 5 bar design pressure at -5 to 60 deg.C. Has welded dished top and bottom heads. Has external jacket rated 5 bar design pressure at -5 to 60 deg.C. Mounted on (4) stainless steel lugs in a frame.
Location: Perry England Warehouse
Stock #VB0007-85
Used Stainless steel tilting double jacket vessel-Total volume about 500 litre-Stainless steel frame-Manual tilting with gearbox-With a spout-Dimensions:- Ø 1360 mm high hopper - Hopper height 400 mm-- Ø 950 mm intermediate - Spherical height 500 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2046-19
Used stainless steel vertical storage tank with volume 500 l. Tank has diameter 600 mm x heigth 1800 mm. Top welded with manway and bolted lid. Bottom central discharge. Mounted on 3 legs.
Location: Perry Poland Warehouse
Stock #U2412-6
Used vertical stainless steel jacketed mixing tank with total volume 500 l. Tank has internal diameter 960 mm x length of straight side of wall 565 mm. Top open, equipped with bolted stainless steel cover. Tank has stainless steel frame agitator with side wall scrappers and reducer. Electric motor not included. Bottom spherical, with flat center. Discharge outlet has diameter 100 mm and is equipped with pneumatically operated valve. There is also bottom connection with diameter 190 mm. Tank is mounted on three stainless steel legs.
Location: Perry Poland Warehouse
Stock #RG8711
Used approximately 500 litre capacity stainless steel mixing vessel. Vessel measures approximately 900mm high X 1130mm diameter. The total height including the legs is approximately 3600mm.
Location: EUROPE
Stock #UG6050
Used horizontal stainless steel rectangular storage tank with 500 Litersl working volume. Polish made. Unit is mounted on 4 wheels. Tank has open top. Dimensions: width 840 mm x length 1250 mm x depth 490 mm. Discharge outlet at the bottom of the front wall. Shipping dimensions 1000 mm wide x 1800 mm long x 600 mm high.
Location: PL
Stock #U2046-25
Used stainless steel vertical storage tank with volume 500 liters. Tank has stainless steel jacket covering halve of length of the wall. Conical bottom with central discharge. Tank has diameter 600 mm x heigth 1800 mm. Top welded with manway with 300 mm diameter. Mounted on 3 lugs.
Location: Perry Poland Warehouse
Stock #U2046-24
Used stainless steel vertical storage tank with volume 500 l. Tank has diameter 600 mm x heigth 1800 mm. Top welded with manway and bolted lid. Bottom central discharge. Mounted on 3 legs.
Location: Perry Poland Warehouse
Stock #U2046-23
Used stainless steel vertical storage tank with volume 500 l. Tank has diameter 600 mm x heigth 1800 mm. Top welded with manway and bolted lid. Bottom central discharge. Mounted on 3 legs.
Location: Perry Poland Warehouse
Stock #U2046-21
Used stainless steel vertical storage tank with volume 500 l. Tank has diameter 600 mm x heigth 1800 mm. Top welded with manway and bolted lid. Bottom central discharge. Mounted on 3 legs.
Location: Perry Poland Warehouse
Stock #U2017-8
Used stainless steel, rectangular storage tank with working volume 500 liters. Tank has dimensions: width 700 mm x length 800 mm x height 1000 mm. Bottom side discharge with valve. Tank is adjusted for transport by the fork lift. Shipping dimensions: length 770 mm x width 950 mm x height 1300 mm x weight 166 kg. New 2001. No technical documentation included.
Location: Perry Poland Warehouse
Stock #U2046-22
Used stainless steel vertical storage tank with volume 500 l. Tank has diameter 600 mm x heigth 1800 mm. Top welded with manway and bolted lid. Bottom central discharge. Mounted on 3 legs.
Location: Perry Poland Warehouse
Stock #U1995-5
Used stainless steel vertical storage tank with a capacity of 500 liters. Cone shaped bottom. Mounted on 3 lugs. Produced in 1998. Internal dimensions: diameter 720 mm and height 1650 mm. Shipping dimensions: diameter 900 mm and height 2000 mm, weight 145 kg.
Location: Perry Poland Warehouse
Stock #L1315-12
Used Sapphire Engineering approximately 500 litre capacity 316L stainless steel vertical mixing vessel. Unit has clamped dished top and welded dished bottom heads. Internal rated 3 bar + static head design pressure at -10 to 135 deg.c. Unit measures approximately 850mm internal diameter x 750mm straight side. Unit has bottom entry 4-blade agitator with electric motor. Unit mounted on wheels
Location: EU
Stock #U2412-5
Used vertical stainless steel jacketed mixing/cooking tank by BCH Limited (UK) with total volume 550 l. Working volume about 400-450 l. Internal diameter 790 mm x lenght of straight side of the wall 550 mm. Top open, equipped with stainless steel safety bars. Tank is equipped with stainless steel horizontal frame agitator with wall scrappers, driven by el. motor and gearbox. Bottom spherical, jacketed, with central discharge outlet with diameter 160 mm. Outlet is equipped with pneumatic operated valve and manually operated valve. Final discharge outlet has diameter 100 mm. Stainless steel heating jacket is rated for work on pressure up to 6 bar at 165 C. Test pressure up to 8.5 bar. Tank is mounted on four stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2281-4
Used vertical stainless steel mixing tank with total volume 580 l. Internal dimensions: diameter 1000 mm x length of straight side of wall 750 mm. Bottom slightly conical shape with central discharge outlet. Tank has top mounted propeller agitator, directly driven by el. motor 0,75 kW, 1380 rpm, 220/380V, 50 hz. Top of tank has cover - half is welded, half is hinged. Tank is mounted on 3 carbon steel legs.
Location: PL
Stock #U2418-16
Used vertical stainless steel mixing tank with total volume 600 l. Internal diameter 835 mm x length of straight side of wall 1035 mm. Top open, has bolted stainless steel cover. Bottom elipsoidal, with central discharge outlet. Tank is equipped with bottom mounted nozzle for feeding gase into the liquid. Tank has top mounted propeller agitator, driven directly by el motor 0,37 kW, 1370 rpm, 230/400 V, 50 hz. There is also top mounted, welded to the wall, perforated stainless steel coil with connection.
Location: Perry Poland Warehouse
Stock #L1366-02
Used approximately 600 litre stainless steel vertical tank. Unit measures approximately 790mm diameter x 1250mm straight side. Has flat hinged lid and welded dished bottom heads. Unit is mounted on (3) legs.
Location: Perry England Warehouse
Stock #L1149-02
Used approximately 600 litre capacity 316 stainless steel vessel. Unit measures approximately 1100mm diameter X 200mm straight side with a 950mm Cone. Has welded dished top and welded Cone bottom heads. Unit is mounted on (4) legs.
Location: Perry England Warehouse
Stock #U806V-8
Used stainless steel jacketed vertical mixing tank by Nagema (Germany) with working volume 630 liters. Jacket is insulated and layered with stainless steel. Tank has top cover with mounted propeller agitator, manually operated. Agitator is driven by gearbox and electric motor 0.35 kW. Tank is mounted on 4 stainless steel legs. Discharge by bottom wall side outlet. Internal dimensions: diameter: 920 mm x height 950 mm. Shipping dimensions: diameter 1150 mm x height 1950 mm x weight approx. 400 kg.
Location: PL
Stock #L1450-02
Used Grundy approximately 630 litre stainless steel vertical vessel. Unit measures approximately 1000mm diameter x 800mm straight side. Has welded dished top and bottom heads. Internal rated bar maximum working pressure. Unit is mounted on (3) legs.
Location: Perry England Warehouse
Stock #U806V-9
Used stainless steel jacketed vertical mixing tank by Nagema (Germany) with working volume 630 liters. Jacket is insulated and layered with stainless steel. Tank has top cover with mounted propeller agitator, manually operated. Agitator is driven by gearbox and electric motor 0.35 kW. Tank is mounted on 4 stainless steel legs. Discharge by bottom wall side outlet. Internal dimensions: diameter: 920 mm x height 950 mm. Shipping dimensions: diameter 1150 mm x height 1950 mm x weight approx. 400 kg.
Location: PL
Stock #L1409-02
Used approximately 640 litre stainless steel storage vessel. Unit measures approximately 950mm diameter x 900mm straight side. Has bolted flat top and welded dished bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #U2433-3
Used vertical stainless steel mxing tank with total volume 650 l. Working volume about 500-550 l. Tank has internal diameter 915 mm x lenght of straight side of wall 990 mm. Bottom flat, with side wall discharge outlet, with pipe and manually operated valve. Top open, with bolted safety bars, covering half of it. Tank is equipped with 3-blades agitator, driven directly by el motor 1.1 kW, 1440 rpm, 220/380V, 50 hz. Tank is mounted on 3 stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2131-4
Used stainless steel storage tank with total volume 650 Liter. Tank has dimensions: diameter 960 mm x 880 mm height of straight side of wall. Has open top and welded dished bottom head with central discharge. Tank is mounted on 3 carbon steel legs. Shipping dimensions: diameter 1 100 mm x height 1100 mm, weight 62 kg. No technical documentation included.
Location: Perry Poland Warehouse
Stock #U2291-1
Second hand stainless steel vertical mixing tank with total volume about 720 l. Tank has internal diameter 890 mm. Skew bottom with wall bottom discharge outlet. Straight side of wall - longer 1230 mm, shorter 1090 mm. Tank is equipped with top mounted paddle type agitator, driven by electric motor 0.37 kW, 1380 rpm, 230/400 V, 50 hz and gearbox. Working rotation of agitator up to 168 rpm. Tank is mounted on 3 stainless steel legs equipped with mobile wheels. Shipping dimensions: diameter 100 cm x height 188 cm.
Location: PL
Stock #U2297-11
Second hand stainless steel vertical mixing tank with total volume 700 l. Tank has diameter 950 mm x depth 1000 mm. Top welded, with inspection manway with diameter 390 mm, with bolted lid. Flat bottom, with side wall discharge outlet. Tank has side wall, bottom agitator driven by el. 0.75 kW, 1410 rpm, 220/380V, 50 hz motor and gearbox. Mounted on three stainless steel legs.
Location: PL
Stock #U2294-7
Used vertical stainless steel storage tank with volume 700 l. Tank has diameter 1130 mm x length of straight side of wall 700 mm. Top and bottom elipsoidal shape, welded. Bottom has central discharge outlet. Top has central inspection manway with diameter 215 mm. Tank is mounted on four stainless steel supports. Shipping dimensions: diameter 120 cm x height 130 cm.
Location: Perry Poland Warehouse
Stock #U2297-8
Second hand vertical stainless steel tank. Volume 700 l. Internal diameter 1000 mm x straight length of the wall 930 mm. Bottom with conical shape with central post for mounting mixing device. Bottom and side walls are covered with thermal insulation. Tank also has heating coil. Top open. Tank is mounted on four stainless steel legs.
Location: PL
Stock #U2046-28
Used stainless steel vertical storage tank with volume 700 Liter Tank has diameter 750 mm x heigt 1550 mm. Top welded with manway and bolted lid. Bottom central discharge. Mounted on 4 legs.
Location: Perry Poland Warehouse
Stock #L1242-14
Used Giusti approximately 700 litre capacity stainless steel vertical vessel. Internal approximately 980mm diameter X 950mm straight side. Has open top and welded dished bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #L1555-01
Used ONM Engineering approximately 700 litre 316L stainless steel vertical storage tank. Unit measures approximately 1,000mm straight side x 1,000mm diameter. Unit has welded dished top and bottom heads. Internal rated atmospheric pressure design pressure at ambient temperature. Unit is mounted on (4) stainless steel legs.
Location: Newton Aycliffe, UK
Stock #L1072-16
Used Giusti approximately 710 litre capacity stainless steel vertical mixing vessel. Internal approximately 1000 mm diameter X 900 mm straight side. Has hinged lid and welded flat bottom heads. Unit has centre driven 2 tier 2 blade paddle type agitator driven by a 0.37 kW motor through a gearbox. Mounted on (3) legs.
Location: Perry England Warehouse
Stock #U2281-3
Used vertical stainless steel mixing tank with total volume 750 l. Internal dimensions: diameter 955 mm x length 1060 mm. Flat bottom, with side wall discharge outlet and manually operated valve. Tank has top mounted propeller agitator, belt driven by el. motor 0,45/0,8 kW, 720/1425 rpm, 380V, 50 hz. Agitator has bottom support with bearing. Top of tank has cover - half is welded, half is hinged. Tank is mounted on 3 carbon steel legs.
Location: PL
Stock #UG6051
Used horizontal stainless steel rectangular storage tank with 750 liters working volume. Polish made. Unit is mounted on 4 wheels. Tank has open top. Dimensions: width 890 mm x length 2030 mm x depth 440 mm. Discharge outlet at the bottom of the back wall. Shipping dimensions 1000 mm wide x 2050 mm long x 600 mm high.
Location: PL
Stock #U2350-3
Used vertical stainless steel mixing tank with volume 750 l. Tank has internal diameter 940 mm x length of straight side 1080 mm. Tank has elipsoidal bottom with central discharge. Top welded, with mounted Veenstra agitator type FRR-150. Agitator has toothed disc with diameter 150 mm and is directly driven by el motor 1.5 kW, 1415 rpm, 230/400 V, 50 hz. Tank has also inspection manway with diameter 420 mm with bolted lid. Tank is mounted on four lugs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2108-4
Used SS rectangular storage tank with 760 litre total capacity. Unit is mounted on 4 legs. Tank has open top. Dimensions width 1200 mm length 800 mm depth 800 mm.
Location: Perry Poland Warehouse
Stock #L1555-02
Used PSV Fabrications approximately 775 litre total capacity and 700 litre working capacity 316L stainless steel jacketed mobile vessel. Unit measures approximately 900mm diameter x 1050mm straight side. Has welded dished top and bottom heads. Internal rated 3.5 bar/full vacuum design pressure at 150 deg.c. Unit has external jacket rated 4 bar / full vacuum design pressure at 150 deg.c. Unit is mounted on (4) stainless steel legs on castors.
Location: Newton Aycliffe, UK
Stock #U2335-2
Used vertical rectangular stainless steel mixing tank by Wolfking Belam B.V. with total volume 800 l. Type BPU-3. Mixing chamber has internal dimensions: L 1125 mm x W 915 mm x D 835 mm. Top open, with stainless steel covers. Tank is equipped with turbine agitator driven directly by el. motor 3 kW, 1450 rpm, 400 V, 50 hz. Bottom side wall discharge outlet with manually operated valve. Tank is also equipped with stainless steel centrifugal pump driven by electric motor 1.1 kW, 2910 rpm, 380/420 V, 50 hz. Includes local control panel. Tank is mounted on stainless steel supporting frame.
Location: Perry Poland Warehouse
Stock #VL0966-08
Used approximately 800 litre vertical stainless steel storage vessel. Internal approximately 910mm diameter X 1610mm straight side. Mounted on (4) side support lugs.
Location: Perry England Warehouse
Stock #L1409-01
Used approximately 800 litre stainless steel storage vessel. Unit measures approximately 850mm diameter x 1400mm straight side. Has bolted flat top and welded conical bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #VL0966-06
Used H. Pontiflex & Sons limited approximately 800 litre vertical stainless steel jacketed mixing vessel. Bridge mounted agitator. Internal approximately 1000mm diameter X 1700mm straight side. Has stainless steel jacket on lower half of body rated 65 psi working pressure. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #VB0007-130
Used Stainless steel BREIL ET MARTEL mixing tank-Total capacity 800 litre-Inclined bottom-Ø 900 x 1200/1400 mm ferrule-Empthing Ø 50 mm-On upper dome 3 taps + 1 manhole Ø 415 mm with lid-Agitator 3 x 3 blades : 2 x Ø 250 mm approximately and 1 x Ø 150 mm approximately-CEM gear motor control-0.37 kw / Hp 0.5 - Rpm 120 - 220/380 volts-Damaged ferrule
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VL0966-09
Used approximately 800 litre vertical stainless steel storage vessel. Internal approximately 910mm diameter X 1610mm straight side. Mounted on (4) side support lugs.
Location: Perry England Warehouse
Stock #VL0966-07
Used H. Pontiflex & Sons limited approximately 800 litre vertical stainless steel jacketed mixing vessel. Bridge mounted agitator. Internal approximately 1000mm diameter X 1700mm straight side. Has stainless steel jacket on lower half of body rated 65 psi working pressure. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #U2422-3
Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish.
Location: Perry Poland Warehouse
Stock #U2422-4
Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish.
Location: Perry Poland Warehouse
Stock #U2422-5
Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish.
Location: Perry Poland Warehouse
Stock #U2422-2
Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish.
Location: Perry Poland Warehouse
Stock #L1580-04
Used Grundy approximately 833 litre (185 gallon) stainless steel vertical vessel. Unit measures approximately 770mm staight side x 1,100mm diameter. Unit has welded dished top and bottom heads. Internal reated 30psi working pressure. Unit is mounted on (3) legs.
Location: Newton Aycliffe, UK
Stock #L1450-01
Used Grundy approximately 863 litre stainless steel vertical vessel. Unit measures approximately 1000mm diameter x 1100mm straight side. Has welded dished top and bottom heads. Internal rated bar maximum working pressure. Unit is mounted on (3) legs.
Location: Perry England Warehouse
Stock #L1072-13
Used approximately 900 litre capacity stainless steel vertical storage vessel. Internal approximately 1000mm diameter X 820mm straight side. Vessel is rated at 0.15 bar. Has welded dished top and Conical bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #U2202
Used stainless steel mixing tank with total volume 900 liters and working volume about 700 liters. Internal dimensions of tank: diameter 1245 mm x depth 750 mm. Tank has open top and insulated walls and bottom. Side bottom discharge outlet. Tank is equipped with agitator - driven by gearbox and EL motor 2.2 kW, 950 rpm, 380 V, 50 hz in EX design. Working rotation speed 30 rpm. Tank has frame agitator with diameter 1150 mm x height 410 mm. Tank is mounted on carbon steel frame.
Location: Perry Poland Warehouse
Stock #L1315-13
Used approximately 500 litre stainless steel vessel.
Location: EU
Stock #L1388-01
Used approximately 1,000 litre stainless steel vertical storage tank. Unit measures approximately 900mm diameter x 1400mm straight side. Has flat top and welded flat bottom heads. Mounted on (3) legs.
Location: Perry England Warehouse
Stock #L1388-02
Used approximately 1,000 litre stainless steel vertical storage tank. Unit measures approximately 900mm diameter x 1400mm straight side. Has flat top and welded flat bottom heads. Mounted on (3) legs.
Location: Perry England Warehouse
Stock #L1388-03
Used approximately 1,000 litre stainless steel vertical storage tank. Unit measures approximately 900mm diameter x 1400mm straight side. Has flat top and welded flat bottom heads. Mounted on (3) legs.
Location: Perry England Warehouse
Stock #U2046-41
Used stainless steel vertical storage tank with volume 1000 l. Tank has diameter 770 mm x heigth 2100 mm. Top welded with manway. Bottom central discharge. Mounted on 4 legs.
Location: Perry Poland Warehouse
Stock #L1363-06
Used approximately 1,000 litre stainless steel storage vessel. Unit measures approximately 1000mm diameter x 1300mm straight side. Has welded dished top and bottom heads.
Location: Perry England Warehouse
Stock #L1388-04
Used approximately 1,000 litre stainless steel vertical storage tank. Unit measures approximately 900mm diameter x 1400mm straight side. Has flat top and welded flat bottom heads. Mounted on (3) legs.
Location: Perry England Warehouse
Stock #U2200-15
Used vertical storage tank designed in contact parts designed in stainless steel. Tank has working volume 1000 l. Internal dimensions of tank: diameter 1050 mm x length of straight site of wall 1250 mm. Tank has open top with lid closed with fasteners. Bottom has delicate Cone shape and central discharge outlet with valve. Tank is mounted on carbon steel support with 3 carbon steel legs. Tank has also the place for mounting the liquid level mettering pipe.
Location: Perry Poland Warehouse
Stock #L1151-27
Used Oliver Y Battle approximately 1000 litre working capacity, 1200 litre total capacity 304 stainless steel vertical receiver vessel. Internal 1000mm diameter X 1250mm straight side. Has welded dished top and bottom heads. Internal rated 1 bar design pressure at 200 DEGC. Mounted on (3) legs. Last used as dump tank.
Location: Perry England Warehouse
Stock #L1363-04
Used approximately 1,000 litre stainless steel mixing vessel. Unit measures approximately 1000mm diameter x 1300mm straight side. Top entry 1 tier 3 blade pitched paddle type agitator driven by a 0.25 kw 1380rpm 3/50 motor via a gearbox. Has welded dished top and conical bottom heads.
Location: Perry England Warehouse
Stock #L1363-05
Used approximately 1,000 litre stainless steel mixing vessel. Unit measures approximately 1000mm diameter x 1300mm straight side. Top entry 1 tier 3 blade pitched paddle type agitator driven by a 0.25 kw 1380rpm 3/50 motor via a gearbox. Has welded dished top and conical bottom heads.
Location: Perry England Warehouse
Stock #U2200-13
Used vertical storage tank designed in contact parts designed in stainless steel. Tank has working volume 1000 l. Internal dimensions of tank: diameter 1050 mm x length of straight site of wall 1250 mm. Top has a central manway with diameter 450 mm with lid closed with fasteners. Bottom has delicate Cone shape and central discharge outlet with valve. Tank is mounted on carbon steel support with 3 carbon steel legs. Tank has also the place for mounting the liquid level mettering pipe.
Location: Perry Poland Warehouse
Stock #UG6063
Used stainless steel rectangular storage tank by Metalchem (Poland) with volume 1 000 l. Bottom discharge with valve. Tank is mounted on a carbon steel frame adjusted for transport by a forklift truck. Shipping dimensions: length 1 050 mm x width 1 050 mm x height 1 500 mm, weight 256 kg. Tank new 1985. No technical documentation included.
Location: PL
Stock #U2200-14
Used vertical storage tank designed in contact parts designed in stainless steel. Tank has working volume 1000 l. Internal dimensions of tank: diameter 1050 mm x length of straight site of wall 1250 mm. Top has a central manway with diameter 450 mm with lid closed with fasteners. Bottom has delicate Cone shape and central discharge outlet with valve. Tank is mounted on carbon steel support with 3 carbon steel legs. Tank has also the place for mounting the liquid level mettering pipe.
Location: Perry Poland Warehouse
Stock #U1912-6
Used stainless steel vertical storage tank with 1000 litres working volume (total 1146 LTR). Tank has diameter 1000 mm and height of straight site of wall 1460 mm. Mounted on 3 legs. Bottom discharge. Inspection manway with the lid on the top. Has nozzle for cleaning purposes. Shipping dimensions: diameter 1200 mm X height 2300 mm.
Location: Perry Poland Warehouse
Stock #U2365-2
Used stainless steel rectangular storage tank by T&D Bison AS (Norway) with working volume 1000 l. Tank is mounted on carbon steel supporting frame. Bottom conical with central dicharge outlet, with manually operated valve. Top welded with central inspection manway with bolted lid - diameter 460 mm. Tank last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2319-4
Used stainless steel vertical storage tank by Gea Finnah with volume 1000 l. Tank has internal diameter 1280 mm and straight side of the wall 750 mm. Top and bottom elipsoidal, welded. At the top there is a manway with lid, with diameter 420 mm. Tank has working temperature up 100C. Central bottom discharge. Mounted on 3 stainless steel legs. Shipping dimensions: L 150 cm x W 130 cm x H 190 cm.
Location: PL
Stock #U2046-39
Used stainless steel vertical storage tank with volume 1000 l. Tank has diameter 770 mm x heigth 2100 mm. Top welded with manway. Bottom central discharge. Mounted on 4 legs.
Location: Perry Poland Warehouse
Stock #U2046-40
Used stainless steel vertical storage tank with volume 1000 l. Tank has diameter 770 mm x heigth 2100 mm. Top welded with manway. Bottom central discharge. Mounted on 4 legs.
Location: Perry Poland Warehouse
Stock #U1973-5
Used vertical mixing tank with total volume 1030 l. Dished bolted top and dished welded bottom with bottom discharge. Polish made, stainless steel. Tank has paddle agitator driven by electric EX designed motor with power 1.1 kW/50 herz through a gearbox, mounted on 4 lugs. Internal diameter 1112 mm x 920 mm of lenght straight site of wall. Shipping dimensions: diameter 1425 mm x height 2460 mm. Technical documentation available.
Location: Perry Poland Warehouse
Stock #U2007-7
Used mobile tank by Alfa Laval (Sweden) with total volume 1060 l. Tank has diameter 1200 mm x length of straight site of wall 770 mm. Conical bottom with discharge valve and height of Cone 450 mm. Tank has a manway with diameter 355 mm and bolted lid. Unit is designed in stainless steel grade 304 and rated for work on pressure range 3 bar. Shipping dimensions: length 1300 mm x width 1300 mm x heigth 1900 mm. New 1980.
Location: Perry Poland Warehouse
Stock #L1303-11
Used approximately 1,100 litre stainless steel vertical vessel. Approximately 1100mm diameter x 1200mm straight side. Mounted on 4 legs.
Location: SPAIN
Stock #U2411-15
Used vertical stainless steel AISI 316 storage tank with a total capacity of 1130 l. Tank has internal diameter 950 mm and length of straight side of wall 1500 mm. Welded conical upper head equipped with an inspection manhole with a cover with a diameter of 220 mm and 2 connections. Welded conical bottom is 300 mm high and has a central discharge outlet with an internal diameter of 65 mm. Tank is mounted on three lugs.
Location: Perry Poland Warehouse
Stock #U2364-2
Used stainless steel horizontal storage tank with open top, rectangular shape. Total volume 1130 l, working volume about 800 l. Tank has internal dimensions: width 593 mm x depth 506 mm x length 4500 mm. Tank is equipped with heating system consist of 6 heating stainless steel pipes (coil) each with diameter 50 mm and connection valves. Discharge outlet is located close to one of the front walls. Tank is equipped with three stainless steel inserts designed from perforated sheet and is mounted on 6 stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #L1061-05
Used approximately 1,200 litre 316L stainless steel jacketed mixing vessel. Internal approximately 1200mm diameter X 380mm straight side. Has welded shallow dished top and welded hemispherical bottom heads. Has stainless steel jacket on hemispherical bottom rated 8 bar test pressure. Includes anchor agitator with provision for wall scrapers direct driven by 1.5 kW 230/400 volt 3/50 1420 rpm motor and gearbox. Mounted on (4) stainless steel lugs.
Location: Perry England Warehouse
Stock #RG8565
Used approximately 1,200 litre Conical mixing vessel. Unit measures approximately 1200mm diameter X 1150mm straight side. Includes twin rotating blades driven by a top mounted 3kW motor. Has hinged dished top head and welded Conical bottom head. Unit is mounted on (4) stainless steel legs.
Location: Perry England Warehouse
Stock #L1299-48
Used Giusti 1,200 litre stainless steel mixing vessel. Internal approximately 1200mm diameter down to 900mm diameter at bottom dish x 2100mm straight side. Has welded dished top and bottom heads. Internal rated 2 bar design pressure at 20 degC. Has offset 3-blade pitched paddle agitator direct driven by 0.75 kW 415 volt 3 phase 5-50 hertz 142-1420 rpm motor via Lightnin model LS-75 gearbox. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1183-20
Used approximately 1,200 litre stainless steel vertical mixing vessel. Stainless steel mixing / blending tank with welded top dish & bottom manufactured by RSP-Arsopi, Portugal. Unit rated 2,5 bar @ 50°C. Vessel measures approx 1,16M O/diameter X 1,0M H on straight side + 0,45M for top & bottom dish. Unit includes top dead centre drive unit, packed gland seal, bolt on / off 4-bladed disc turbine agitator. Drive unit:in-line sew Eurodrive motor: 2,2kW / 220-380V / 1420-30 rpm / 3PH / 50HZ/ IP54 / ins. Class B. Top openings: 1 X 150mm diameter manway / handhole with quick release hinged lid, flanges top: 1 X 50mm threaded (male) 1 X 25mm threaded (male), 2 X 25mm threaded (female), 1 X 600mm top dead centre flange for drive unit. Straight side: 1 X 150 X 100mm blanked flange, 2 X 30mm threaded (female). Centre bottom outlet 50mm threaded pipe (male). Unit supported / mounted by 4 X 90mm carbon steel pipe legs with feet / pads.
Location: Perry England Warehouse
Stock #U2411-11
Used vertical stainless steel AISI 316 mixing tank by AUSTENIT SZTAJERWALD (Poland) with a total capacity of 1200 l. Working volume is 1000 litres. Tank has internal diameter 1100 mm and length of straight side of wall 1000 mm. The device is equipped with a disc agitator mounted on 2 levels, without a drive. Welded dished upper head equipped with an inspection manhole with a cover with a diameter of 410 mm, 4 connections and place to mount the drive for agitator. Welded conical bottom is 550 mm high and has a central discharge outlet with an internal diameter of 85 mm. Tank is mounted on four legs.
Location: Perry Poland Warehouse
Stock #U2411-10
Used vertical stainless steel AISI 316 storage tank by AUSTENIT SZTAJERWALD (Poland) with a total capacity of 1200 l. Working volume is 1100 litres. Tank has internal diameter 1100 mm and length of straight side of wall 1000 mm. Welded dished upper head equipped with an inspection manhole without a cover with a diameter of 410 mm, 4 connections and place to mount the drive and agitator. Welded conical bottom is 550 mm high and has a central discharge outlet with an internal diameter of 85 mm. Tank is mounted on four legs.
Location: Perry Poland Warehouse
Stock #U2411-9
Used vertical stainless steel AISI 316L storage tank by WELDING STAR (Poland) with a total capacity of 1200 l. Working volume is 1100 litres. Tank has internal diameter 1100 mm and length of straight side of wall 1000 mm. Welded dished upper head equipped with an inspection manhole without a cover with a diameter of 400 mm, 5 connections and place to mount the drive and agitator. Welded conical bottom is 550 mm high and has a central discharge outlet with an internal diameter of 100 mm. Tank is mounted on four legs.
Location: Perry Poland Warehouse
Stock #VB0001-16
Used 1200 litre stainless steel vessel. Internal dimensions: 900 X 1350mm - H1000 mm. Outlet Diameter 34mm. (2) units available.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U1973-2
Used vertical mixing tank with total volume 1300 ltr. Dished bolted top and dished welded bottom with bottom discharge. Polish made, stainless steel. Tank has paddle agitator working with rotation speed 65 rpm, driven by electric motor with power 2.2 kW/50 HZ. Mounted on 4 lugs. Internal diameter 1216 mm x 960 mm of length straight side of wall. Tank mounted on 4 lugs. Shipping dimensions: diameter 1525 mm x height 3140 mm.
Location: Perry Poland Warehouse
Stock #L1537-01
Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs.
Location: Newton Aycliffe, UK
Stock #L1404-02
Used approximately 1,400 litre vertical stainless steel jacketed mixing vessel. Unit measures approximately 1070mm diameter x 1500mm straight side. Has welded dished bottom with open top with lids. Unit has bridge mounted stainless steel turbine type agitator with 30kw motor/drive. Unit has external coil jacket.
Location: Newton Aycliffe, UK
Stock #U2093-7
Used SS rectangular storage tank with 1400 litre capacity. Polish made. Unit is mounted on 6 legs. Tank has open top and bottom side discharge. Dimensions width 910 mm length 3080 mm depth 500 mm. Shipping dimensions 1050 mm wide x 3300 mm length x 850 mm high.
Location: Perry Poland Warehouse
Stock #L1404-04
Used approximately 1,400 litre vertical stainless steel tank. Unit measures approximately 1400mm diameter x 1100mm straight side. Unit has welded dished top and bottom heads. Unit is mounted on 4 legs.
Location: Newton Aycliffe, UK
Stock #U2181-3
Used stainless steel vertical storage tank with working volume 1400 l. Tank has Conical bottom with central discharge. Internal diameter 1130 mm x cylindrical part length 1200 mm. Length of Conical bottom 910 mm. Tank is mounted on 3 stainless steel legs and has open top. Shipping dimensions: diameter 130 cm x L 290 cm x weight 300 kg.
Location: Perry Poland Warehouse
Stock #U2411-8
Used vertical stainless steel AISI 316 storage tank with a total capacity of 1450 l. Tank has internal diameter 1150 mm and length of straight side of wall 1250 mm. Top is welded and equipped with an inspection manhole with a cover with a diameter of 300 mm, a central hole with a diameter of 135 mm adapted for mounting a drive/stirrer and 2 connections. Welded conical bottom is 450 mm high and has a central discharge outlet with a manually operated butterfly valve with an internal diameter of 65 mm. Tank is mounted on three lugs.
Location: Perry Poland Warehouse
Stock #U2411-2
Used vertical stainless steel AISI 316 storage tank with a total capacity of 1480 l. Tank has internal diameter 950 mm and length of straight side of wall 2000 mm. Conical shape top is welded with a inspection manway with diameter 240 mm and equipped with 2 connections. Welded conical bottom is 270 mm high and has a central discharge outlet with a pneumatically operated butterfly valve. Tank is mounted on stainless steel supporting frame.
Location: Perry Poland Warehouse
Stock #L1310-02
Used Langfields approximately 1,490 litre total capacity and 1,200 litre working capacity 304L stainless steel vertical mixing vessel. Unit measures approximately 1,200mm diameter x 1018mm straight side. Unit has welded dished top and bottom heads. Unit includes top entry 304L stainless steel anchor type agitator driven by a 1.1kw 14.9 rpm 220/240-380/420 volt 3/50 motor through a Transkem gearbox. Unit mounted on 4 legs.
Location: Newton Aycliffe, UK
Stock #RG9207
Used 1,500 litre Websters stainless steel vertical liquid storage tank. Vessel measures 1,0M diameter X 1,93M H on straight side + 0,3M per dished end & flanges. Top openings: 2 X 100mm, 2 X 50mm flanges & 1 X 150mm sight glass. Side openings bottom straight side: 1 X 75mm, top straight side: 50mm, centre bottom outlet: 75mm. Unit supported / mounted by 4 X 100mm DIA C/S pipe legs giving approximately 840mm floor clearance from the bottom outlet flange, unit has 2 X top dish lifting / handling / handling eyes
Location: Perry England Warehouse
Stock #L0853-04
Used Packo Inox approximately 1,500 litre stainless steel vertical jacketed vessel. Approximately 1200mm diameter x 1100mm straight side. Internal rated full vacuum/2 bar design pressure at 100 DEGC. Stainless steel jacket 30 litre capacity rated 2 bar design pressure at 120 DEGC. Welded dished top and bottom heads. Mounted on (3) legs.
Location: Perry England Warehouse
Stock #L1557
Used approximately 1,500 litre capacity stainless steel vertical mixing vessel. Unit measures appriximately 1,250mm staight side x 1,200mm diameter. Unit has welded dished top and bottom heads. Internal rated atmospheric pressure at ambient temperature. Unit has off-set top entry stainless steel 4-blade pitched balde agitator driven by 0.75kw, 1375rpm, 50Hz geared motor. Unit is mounted on (3) stainless steel legs.
Location: Newton Aycliffe, UK
Stock #U2128-4
Used stainless steel vertical mixing tank with total volume 1700 l and working volume about 1500 l. Tank has central mounted paddle type agitator driven by gearbox. Motor missing. Flat bottom with side discharge and side wall inspection manway. Half-open bolted top. Tank is mounted on 4 legs. Internal dimensions 950 mm and height 2400 mm. Shipping dimenssions diameter 1100 mm and height 2900 mm.
Location: Perry Poland Warehouse
Stock #U2128-3
Used stainless steel vertical mixing tank with total volume 1700 l and working volume about 1500 l. Tank has central mounted paddle type agitator driven by gearbox. Motor missing. Flat bottom with side discharge and side wall inspection manway. Half-open bolted top. Tank is mounted on 4 legs. Internal dimensions 950 mm and height 2400 mm. Shipping dimenssions diameter 1100 mm and height 2900 mm.
Location: Perry Poland Warehouse
Stock #U2378-1
Used vertical stainless steel mixing tank with total volume 1500 l. Tank has internal dimensions: diameter 109 cm x length of straight side of wall 156 cm. Top open with mounted stainless steel agitator, equipped with toothed disc head. Agitator is directly driven by el motor 14.5 kW, 2925 rpm, 380 V, 50 hz. Ex design (EEx-e-II-T3). Toothed disc has diameter 200 mm. Bottom welded, elipsoidal, with central discharge outlet, equipped with manually operated ball valve. Tank is mounted on 4 stainless steel legs.
Location: Perry Poland Warehouse
Stock #U2378-2
Used vertical stainless steel mixing tank with total volume 1500 l. Tank has internal dimensions: diameter 109 cm x length of straight side of wall 156 cm. Top open with mounted stainless steel agitator, equipped with toothed disc head. Agitator is directly driven by el motor 15 kW, 2905 rpm, 380 V, 50 hz. Toothed disc has diameter 200 mm. Bottom welded, elipsoidal, with central discharge outlet, equipped with manually operated ball valve. Tank is mounted on 4 stainless steel legs.
Location: Perry Poland Warehouse
Stock #VB0007-84
Used Stainless steel tank-Capacity 1550 litre-Ferrule Ø 1250 x 1300 mm-Emptying Ø 45 mm-Overall height 2300 mm-1 manhole Ø 380 mm and 2 taps on the upper dome-Can receive an agitator
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2333-9
Used vertical stainless steel storage tank by Kates (PL) type 2Z1,6 with working volume 1600 l. Tank has internal dimensions: diameter 1280 mm x straight side of wall 1330 mm. Tank has slightly conical bottom with central outlet. Valve not included. Side walls and bottom are layered with stainless steel safety jacket (has inspection window). Top welded, has manway with bolted lid diameter 625 mm. Tank is mounted on three stainless steel legs with tension sensors and stainless steel supporting frame. Sensors are connected to scale panel which is in Ex design. Shipping dimensions (in horizontal position) L 240 cm x W 155 cm x H 170 cm x weight about 500 kg.
Location: Perry Poland Warehouse
Stock #VB0007-47
Used stainless steel tank with a capacity of 1,600 litres. Approximately 1250 mm diameter x 1350 mm straight side. Discharge approximately 45 mm diameter. Overall height 2300 mm. Manway diameter is approximately 380 mm. Includes (3) taps on the upper dome. Can receive an agitator.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1404-03
Used approximately 1,600 litre stainless steel vertical tank. Unit measures approximately 1070mm diameter x 1800mm straight side. Has welded dished bottom and open top with lids. Unit is mounted on 3 legs.
Location: Newton Aycliffe, UK
Stock #U2343-2
Used vertical stainless steel storage tank by Obram (PL). Tank has total volume about 1900 l and working about 1600 l. Tank has internal diameter 1400 mm x length of straight side of wall 1220 mm. Side walls and bottom are insulated. Bottom conical, with central discharge. Top welded with inspection manway with diameter 435 mm and lid. Tank is mounted on four stainless steel legs.
Location: Perry Poland Warehouse
Stock #U2377-6
Used vertical stainless steel storage tank by PP-U Montochem S.A. (Poland) with a total capacity of 1600 l. Tank has diameter 1400 mm x length of straight side of wall 1000 mm. Unit has a welded flat top with a inspection manway with diameter 400 mm and bolted lid. Tank has conical bottom with central discharge outlet, equipped with a manually operated ball valve. Tank is mounted on 4 lugs. Technical documentation is not included.
Location: Perry Poland Warehouse
Stock #U2333-8
Used vertical stainless steel storage tank by Kates (PL) type 2Z1,6 with working volume 1600 l. Tank has internal dimensions: diameter 1280 mm x straight side of wall 1330 mm. Tank has slightly conical bottom with central outlet. Valve not included. Side walls and bottom are layered with stainless steel safety jacket (has inspection window). Top welded, has manway with bolted lid diameter 625 mm. Tank is mounted on three stainless steel legs with tension sensors and stainless steel supporting frame. Sensors are connected to scale panel which is in Ex design. Shipping dimensions (in horizontal position) L 240 cm x W 155 cm x H 170 cm x weight about 500 kg.
Location: Perry Poland Warehouse
Stock #VB0007-09
Used Cylindrical, vertical vessel, dished bottom, on 3 feet-On the top 1 tilting man hole-1.4404 stainless steel-Central outlet-Agitator 3 blades-Drive with geared box : Hp 1,5 - Rpm 90 - 3x 230/400 Volts-Without electric control panel
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L0729-02
Used approximately 1,700 litre T316 stainless steel vertical reactor. Unit has welded dished top and bottom heads. Measures approximately 1900mm straight side X 1100mm diameter. Unit includes stainless steel 3-tier 4 blade top entry agitator driven by a 5.5kW, 3/50/415, 1440rpm flameproof electric motor through a Greaves model WGH4 heavy duty gearbox. Previously used with Greaves model bed5 bottom entry high speed mixer, 1500/3000rpm, 3/50/415, 0.82-4kW flameproof electric motor. Unit has stainless steel dimple jacket. Mounted on (4) stainless steel legs.
Location: UK
Stock #L1242-03
Used approximately 1,700 litre capacity stainless steel vertical mixing vessel. Internal approximately 1000mm diameter X 2150mm straight side. Has bolted flat top and welded dished bottom heads. Unit includes 2-blade stainless steel propellor agitator direct driven by 1.1 kW 220-415 volt 3/50 690 rpm motor. Mounted on (3) legs.
Location: Perry England Warehouse
Stock #L1072-45
Used JA Welch approximately 1780 litre stainless steel vertical mixing vessel. Internal approximately 1219mm diameter X 1525mm straight side. Has bolted dished top head and welded Conical bottom heads. Includes typhoon offset 2-tier 3-blade pitched paddle type belt driven by 3 kW 400/690 volt 3/50 1415 rpm motor. Mounted on ring.
Location: Perry England Warehouse
Stock #L0856-16
Used approximately 1,800 litre working capacity stainless steel vertical mixing vessel. Internal approximately 1448mm diameter X 1600mm straight side. Has welded flat top and bottom heads. Unit includes offset 2-blade stainless steel propellor agitator direct driven by 3 kW 380/220 volt 3/50 1450 rpm motor via Fenner gearbox rated 268 rpm output. Also includes (1) baffle.
Location: Perry England Warehouse
Stock #U2418-4
Used vertical stainless steel storage tank by AMS Textile Machinery Co. (TU). Tank has total volume 1900 l. Internal diameter 1280 mm x length of straight side of wall 1330 mm. Tank is rated for work on pressure up to 4 bar and temperature up to 135 C. Top and bottom elipsoidal. Top pneumatically risen. Bottom welded, with central discharge outlet. Three connections on discharge - bottom with diameter 125 mm and side outlets with diameter 140 and 158 mm. Tank is mounted on 4 stainless steel legs. Last time used in textile industry as dye tank. Technical documentation is not included.
Location: Perry Poland Warehouse
Stock #L1506-03
Used approximately 2,000 litre stainless steel storage vessel. Internal approximately 1100mm diameter x 2000mm straight side. Has welded dished top and bottom heads. Mounted on 3-legs.
Location: Perry England Warehouse
Stock #L1003-15
Used 2000 litre capacity 316L stainless steel vertical agitated pressure vessel. Internal 1300mm diameter X 1400mm straight side. Has bolted dished top and welded dished bottom heads. Internal rated full vacuum/1.1 bar design pressure at -15/+115 DEGC. Includes top entry stainless steel 4-blade pitched paddle agitator belt driven by 5.5 kW 220/380 volt 3/50 1430 rpm motor via sew Eurodrive variable speed gearbox rated 17.08/1 reduction ratio at 1430/29/177 rpm. Also includes 4-baffles. Mounted on (4) lugs.
Location: Perry England Warehouse
Stock #L1506-04
Used approximately 2,000 litre stainless steel storage vessel. Internal approximately 1100mm diameter x 2000mm straight side. Has welded dished top and bottom heads. Mounted on 3-legs.
Location: Perry England Warehouse
Stock #L1506-01
Used approximately 2,000 litre stainless steel storage vessel. Internal approximately 1100mm diameter x 2000mm straight side. Has welded dished top and bottom heads. Mounted on 3-legs.
Location: Perry England Warehouse
Stock #U2369-1
Used vertical stainless steel mixing tank with total volume about 2200 l. Tank has internal diameter 1200 mm x length of straight side of wall 2000 mm. Top open, covered with manually operated lid, equipped with stainless steel propeller agitator driven by gearbox and el motor 1.5 kW, 1420 rpm, 220-380 V, 50 hz. Bottom welded, with slightly conical shape. Central discharge main outlet, and two bottom connections/outlets. Tank is mounted on stainless steel round support. Shipping dimensions (horizontal position) L 300 cm x diameter 130 cm.
Location: Perry Poland Warehouse
Stock #U2369-2
Used vertical stainless steel mixing tank with total volume about 2200 l. Tank has internal diameter 1200 mm x length of straight side of wall 2000 mm. Top open, covered with manually operated lid, equipped with stainless steel propeller agitator driven by gearbox and el motor 1.5 kW, 1420 rpm, 220-380 V, 50 hz. Bottom welded, with slightly conical shape. Central discharge main outlet, and two bottom connections/outlets. Tank is mounted on stainless steel round support. Shipping dimensions (horizontal position) L 300 cm x diameter 130 cm.
Location: Perry Poland Warehouse
Stock #U2369-4
Used vertical stainless steel storage tank with total volume about 2200 l. Tank has internal diameter 1200 mm x length of straight side of wall 2000 mm. Top open, covered with manually operated lid, equipped with drive for propeller agitator (1.5 kW el motor and gearbox), but agitator is not included. Bottom welded, with slightly conical shape. Central discharge main outlet, and two bottom connections/outlets. Tank is mounted on stainless steel round support. Shipping dimensions (horizontal position) L 300 cm x diameter 130 cm.
Location: Perry Poland Warehouse
Stock #U2369-3
Used vertical stainless steel storage tank with total volume about 2200 l. Tank has internal diameter 1200 mm x length of straight side of wall 2000 mm. Top open, covered with manually operated lid, equipped with drive for propeller agitator (1.5 kW el motor and gearbox), but agitator is not included. Bottom welded, with slightly conical shape. Central discharge main outlet, and two bottom connections/outlets. Tank is mounted on stainless steel round support. Shipping dimensions (horizontal position) L 300 cm x diameter 130 cm.
Location: Perry Poland Warehouse
Stock #L1366-04
Used approximately 2,200 litre stainless steel vertical tank. Unit measures approximately 1500mm diameter x 1200mm straight side. Has flat top with half hinged lid and welded conical bottom heads. Straight side is lagged and clad. Unit is mounted on (4) legs. Last used for storing olive oil.
Location: Perry England Warehouse
Stock #L1366-03
Used approximately 2,200 litre stainless steel vertical tank. Unit measures approximately 1500mm diameter x 1200mm straight side. Has flat top with half hinged lid and welded conical bottom heads. Straight side is lagged and clad. Unit is mounted on (4) legs. Last used for storing olive oil.
Location: Perry England Warehouse
Stock #L0874-15
Used approximately 2,200 litre stainless steel vertical storage vessel. Unit measures approximately 1500 mm diameter X 1510 mm straight side. Unit has bolted flat top with hinged lid section and welded dished bottom heads. Unit is mounted on (4) side support lugs.
Location: Perry England Warehouse
Stock #L0874-18
Used IVANS approximately 2,400 litre stainless steel vertical process vessel. Unit measures approximately 1560 mm diameter X 1480 mm straight side. Unit has bolted dished top and welded dished bottom heads. Internal rated 2 bar design pressure. Unit includes stainless steel anchor agitator with wall scrapers and 3-tier 2-blade pitched paddles direct driven by 15 kW 415 volt 3/50 960 rpm motor via CARL Bockwoldt gearbox rated 42.24/1 reduction ratio. Also includes stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 18.5 kW 415 volt 3/50 1485 rpm motor and gearbox. Unit is mounted on (3) side support lugs.
Location: Perry England Warehouse
Stock #L1299-25
Used Giusti 2,500 litre 316 stainless steel storage vessel. Internal approximately 1100mm diameter x 2400mm straight side. Has welded dished top and bottom heads. Internal rated 2 bar design pressure at 20 degC. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L0856-15
Used approximately 2,500 litre stainless steel vertical mixing vessel. Unit measures approximately 1300mm diameter X 1900mm straight side. Has bolted flat top and welded flat bottom heads. Unit includes off-set bridge mounted stainless steel propellor type agitator with 2HP electric drive and gearbox.
Location: Perry England Warehouse
Stock #L0856-23
Used approximately 2,500 litre stainless steel vertical mixing vessel. Unit measures approximately 1300mm diameter X 1900mm straight side. Has bolted flat top and welded flat bottom heads. Unit includes off-set bridge mounted stainless steel propellor type agitator with 2HP electric drive and gearbox.
Location: Perry England Warehouse
Stock #U2375-3
Used stainless steel vertical mixing tank by Argo (PL) type AZ3-2.5. Total volume 2500 l. Tank has thermal insulation and is equipped with jacket on bottom and side walls. Internal dimensions: diameter 1320 mm x length of straight side of wall 1800 mm. Tank is equipped with four blades paddle agitator, driven via gearbox and el. motor with power about 0,75 kW. Bottom discharge outlet at side wall. Tank is mounted on three stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2377-5
Used vertical stainless steel storage tank by PP-U Montochem S.A. (Poland) with a total capacity of 2500 l. Tank has diameter 1600 mm x length of straight side of wall 1000 mm. Unit has a welded flat top with a inspection manway with diameter 400 mm and bolted lid. Tank has conical bottom with central discharge outlet, equipped with a manually operated ball valve. Tank is mounted on 4 lugs. Technical documentation is not included.
Location: Perry Poland Warehouse
Stock #U2377-4
Used vertical stainless steel storage tank by PP-U Montochem S.A. (Poland) with a total capacity of 2500 l. Tank has diameter 1600 mm x 1000 mm length of straight side of wall. Unit has a welded flat top with a inspection manway with diameter 400 mm and bolted lid. Tank has conical bottom with central discharge outlet, equipped with a manually operated ball valve. Tank is mounted on 4 lugs. Technical documentation is not included.
Location: Perry Poland Warehouse
Stock #L0856-18
Used approximately 2,500 litre stainless steel vertical mixing vessel. Unit measures approximately 1300mm diameter X 1900mm straight side. Has bolted flat top and welded flat bottom heads. Unit includes off-set bridge mounted stainless steel 2-blade propellor agitator with 2HP motor/gearbox.
Location: Perry England Warehouse
Stock #L1299-34
Used Giusti 2,750 litre 316 stainless steel storage vessel. Internal approximately 900mm diameter x 3200mm straight side. Has welded dished top and bottom heads. Internal rated 2 bar design pressure at 20 degC. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1299-39
Used Giusti 2,750 litre stainless steel storage vessel. Internal approximately 900mm diameter x 3200mm straight side. Has welded dished top and bottom heads. Internal rated 2 bar design pressure at 20 degC. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1299-36
Used Giusti 2,750 litre stainless steel storage vessel. Internal approximately 900mm diameter x 3200mm straight side. Has welded dished top and bottom heads. Internal rated 2 bar design pressure at 20 degC. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #U2375-6
Used vertical stainless steel mixing tank with total volume 2800 l. Tank has internal dimensions: diameter 147 cm x length of straight side of wall 170 cm. Tank has flat bottom, with side wall discharge outlet. Bottom and side walls are layered with thermal insulation. Top welded, has inspection manway with diameter 450 mm and stainless steel lid. Tank is equipped with four paddle agitator, driven via gearbox (reduction i= 3,93) and el motor 0.75 kW, 1410 rpm, 220-380 V, 50 hz. Working rotation of agitator about 358 rpm. Tank is mounted on 3 stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #UG6303
Used stainless steel vertical extractor tank by APV with volume 2850 l. Tank is designed for work on atmospheric pressure at temperature up to 96C. Bottom elipsoidal with liquid outlet and mounted stainless steel screen. Top has connection inlet. Bottom discharge, via fully opened, pneumatically operated bottom heads. Tank is mounted on carbon steel lugs.
Location: PL
Stock #U2375-5
Used vertical stainless steel mixing tank with total volume 2900 l. Tank has internal diameter 138 cm x length of straight side of wall 196 cm. Flat bottom with side wall discharge outlet, equipped with manually operated valve. Top welded, equipped with manway with lid, diameter 40 cm. Tank is equipped with two paddle agitator, driven by gearbox and el motor with power 1 kW. Tank is mounted on three stainless steel legs.
Location: Perry Poland Warehouse
Stock #L1363-02
Used approximately 3,000 litre stainless steel mixing vessel. Unit measures approximately 1400mm diameter x 2000mm straight side. Top entry 1 tier 4 blade pitched paddle type agitator with no motor or gearbox. Has welded dished top and conical bottom heads.
Location: Perry England Warehouse
Stock #L1421-27
Used Forfab approximately 3,000 litre stainless steel vertical storage vessel. Internal approximately 1500mm diameter x 1550mm straight side. Has welded dished top and bottom heads. Internal rated 1.35 bar/full vacuum design pressure. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #VB0015-01
Used approximately 3000 litre stainless steel vertical mixing tank. Vessel measures approximately 1400mm diameter x 2100mm straight side. Has conical bottom. Offset 3 blade agitator. Agitator speed is approximately 50rpm. Driven by 4kw, 5,5HP, 1500rpm, 400/690V.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2102-7
Used stainless steel 304 mixing tank with working capacity 3000 l. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #U2102-3
Used stainless steel 304 mixing tank with working capacity 3000 litre. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #U2102-2
Used stainless steel 304 mixing tank with working capacity 3000 litre. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #U2102-1
Used stainless steel 304 mixing tank with working capacity 3000 litre. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #U2102-4
Used stainless steel 304 mixing tank with working capacity 3000 litre. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #U2102-5
Used stainless steel 304 mixing tank with working capacity 3000 litre. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #U2260-1
Used horizontal stainless steel storage tank by Mueller Europa B.V. (Netherlands) with total volume 3000 l and working volume about 2900 l. Tank has elipsoidal shape with width 1760 mm x 1270 mm height x length 1935 mm. Walls are insulated and equipped with cooling coil. Tank has bottom discharge outlet at wall side. Mounted on 4 stainless steel legs. At the top there is an inspection manway with diameter 450 mm equipped with lid. There is also mounted a paddle agitator driven by electric motor. Tank is also equipped with thermometer. Last time used on cooling water for food production. Cooling device is not included.
Location: PL
Stock #U2102-8
Used stainless steel 304 mixing tank with working capacity 3000 litre. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #L1535-04
Used approximately 3,000 litre stainless steel vertical storage tank. Unit measures approximately 1,700mm diameter x 1,560mm straight side. Unit is mounted on mild steel legs.
Location: Newton Aycliffe, UK
Stock #L1407-03
Used approximately 3,000 litre stainless steel storage vessel. Unit measures approximately 1800mm diameter x 1200mm straight side. Has welded conical top and dished bottom heads. Mounted on (3) legs.
Location: Perry England Warehouse
Stock #L1363-03
Used approximately 3,000 litre stainless steel mixing vessel. Unit measures approximately 1400mm diameter x 1900mm straight side. Top entry 1 tier 3 blade pitched paddle type agitator with no motor or gearbox. Has welded dished top and conical bottom heads.
Location: Perry England Warehouse
Stock #L1421-33
Used Mcmillan approximately 3,000 litre stainless steel vertical storage vessel. Internal approximately 1400mm diameter x 2000mm straight side. Has welded dished top and bottom heads. Internal rated 1.5 bar/full vacuum design pressure at 20 degC. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1421-24
Used Forfab approximately 3,000 litre stainless steel vertical storage vessel. Internal approximately 1500mm diameter x 1550mm straight side. Has welded dished top and bottom heads. Internal rated 1.35 bar/full vacuum design pressure. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1421-26
Used Forfab approximately 3,000 litre stainless steel vertical storage vessel. Internal approximately 1500mm diameter x 1550mm straight side. Has welded dished top and bottom heads. Internal rated 1.35 bar/full vacuum design pressure. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1421-31
Used Desmet approximately 3,000 litre stainless steel vertical storage vessel. Internal approximately 1500mm diameter x 1500mm straight side. Has welded dished top and bottom heads. Internal rated atmospheric design pressure at 40 degC. Mounted on 4-legs. Last used as ims/water buffer tank.
Location: Perry England Warehouse
Stock #U2102-6
Used stainless steel 304 mixing tank with working capacity 3000 litre. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #U2102-9
Used stainless steel 304 mixing tank with working capacity 3000 litre. Inside measures: 1500 mm diameter, 2000 mm deep. Has insulation with mineral woll and galvanized sheet, flat bottom and half open top. Frame type agitator driven via gearbox by 1445 rpm, 5.5 kW motor. Shipping diemensions: 1650 mm diameter, 2700 mm height without motor. No technical documentation.
Location: Perry Poland Warehouse
Stock #U2411-1
Used vertical stainless steel storage tank by "Societe LBL" (FR). Tank has internal diameter 135 cm x length of straight side of wall 220 cm, what gives total volume about 3150 l. Top is welded, equipped with 4 connections (1x 200 mm , 2 x 100 mm, 1 x 25 mm). Bottom welded, with central discharge outlet with diameter 250 mm. Tank is mounted on stainless steel supporting frame. Material of tank - stainless steel 316L.
Location: Perry Poland Warehouse
Stock #L1421-15
Used Mcmillan approximately 3,170 litre stainless steel vertical mixing vessel. Internal approximately 1500mm diameter x 1500mm straight side. Has welded dished top and bottom heads. Internal rated atmospheric design pressure. Unit has a 3-blade 2-tier pitched paddle type agitator. No motor. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1527-01
Used Kells Stainless Ltd approximately 3,200 litre 304 stainless steel vertical storage tank. Unit measures approximately 1,480mm diameter x 1,620mm straight side. Unit has welded dished top and bottom heads. Unit mounted on (4) stainless steel legs.
Location: Newton Aycliffe, UK
Stock #L1527-02
Used Kells Stainless Ltd approximately 3,200 litre 304 stainless steel vertical storage tank. Unit measures approximately 1,480mm diameter x 1,620mm straight side. Unit has welded dished top and bottom heads. Unit mounted on (4) stainless steel legs.
Location: Newton Aycliffe, UK
Stock #L1527-04
Used Kells Stainless Ltd approximately 3,200 litre 304 stainless steel vertical storage tank. Unit has welded cone top and welded flat sloped bottom heads. Unit measures 1,800mm diameter x 1,450mm and 1,100mm straight sides. Unit is mounted on (4) stainless steel legs.
Location: Newton Aycliffe, UK
Stock #L1527-03
Used Kells Stainless Ltd approximately 3,200 litre 304 stainless steel vertical storage tank. Unit has welded cone top and welded flat sloped bottom heads. Unit measures 1,800mm diameter x 1,450mm and 1,100mm straight sides. Unit is mounted on (4) stainless steel legs.
Location: Newton Aycliffe, UK
Stock #U2418-5
Used vertical stainless steel storage tank by L.A.I.P. Srl (IT). Tank has total volume 3400 l. Internal diameter 1540 mm x length of straight side of wall 1840 mm. Top open, has stainless steel cover bolted. Bottom elipsoidal, with central discharge outlet, equipped with stainless steel screen and pneumatically operated valve. Tank is equipped with bottom mounted nozzle for feeding gase into the liquid, and bottom coil for feeding steam/liquid into the tank. At the top of the tank, there is second perforated stainless steel coil welded to the wall and equipped with connection. Tank is mounted on 3 stainless steel legs. Last time used in textile industry.
Location: Perry Poland Warehouse
Stock #U2375-1
Used stainless steel vertical mixing tank by Argo (PL) type AZ3-3,5. Total volume 3500 l. Tank has thermal insulation and is equipped with jacket on bottom and side walls. Internal dimensions: diameter 1640 mm x length of straight side of wall 1600 mm. Tank is equipped with four blades paddle agitator, driven via gearbox and el. motor with power about 3 kW, 1420 rpm, 400-690 V, 50 hz. Working rotation of agitator about 476 rpm. Bottom discharge outlet at side wall. Tank is mounted on three stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #L1421-29
Used Desmet approximately 3,500 litre stainless steel vertical storage vessel. Internal approximately 1500mm diameter x 1500mm straight side. Has welded dished top and bottom heads. Internal rated atmospheric design pressure at 40 degC. Mounted on 4-legs. Last used as solvent work tank.
Location: Perry England Warehouse
Stock #L1421-39
Used Desmet approximately 3,500 litre stainless steel vertical storage vessel. Internal approximately 1600mm diameter x 1500mm straight side. Has flat top and conical bottom heads. Internal rated atmospheric design pressure at 40 degC. Mounted on 4-legs.
Location: Perry England Warehouse
Stock #L1295
Used approximately 3,500 litre stainless steel horizontal storage vessel. Unit measures approximately 1820mm straight side X 1600mm diameter. Has welded cone ends. Unit is mounted on (2) mild steel saddles.
Location: Perry England Warehouse
Stock #VB0007-158
Used GOAVEC stainless steel mixing tank 3500 litre with double jacket-No. 88AP06 of 05/1988-Cylindrical, vertical tank with double jacket and heat insulation on 3 feet-On the top 1 manhole with tilting lid -1 agitatior, scraping frame +1 baffle-Gear motor: 4 kw - Hp 5.5 - Rpm 1420/24 - 3x 230/400 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2418-1
Used vertical stainless steel storage tank by L.A.I.P. Srl (IT). Desgned in stainless steel AISI 316L (1.4404). Tank has volume 3800 l and is rated for work on pressure up to 4.5 bar at temperature range from 2 up to 156 C. Internal diameter 1446 mm x length of straight side of wall 1800 mm. Top and bottom elipsoidal. Top is pneumatically risen. Closing by clamp and ring. Tank is mounted on 4 stainless steel legs. Central bottom discharge. Three connections on discharge - two with diameter 206 mm and one with diameter 129 mm. Last time used in textile industry as a dye tank. Technical documentation included.
Location: Perry Poland Warehouse
Stock #L1580-03
Used Moeschle approximately 3,800 litre total capacity 304 stainless steel vertical storage vessel. Unit measures approximately 1,000mm straight side x 2,000mm diameter. Unit has welded dished top and bottom heads. Unit mounted on (3) legs.
Location: Newton Aycliffe, UK
Stock #U2265-3
Used vertical stainless steel storage tank with total volume 3900 l and working volume about 3600 l. Tank has internal diameter 1900 mm x and straight side of wall 1400 mm. Bottom, side walls and top are insulated. Top welded, has central feeding inlet and inspection manway with diameter 400 mm and lid. Flat bottom, with skew surface. Discharge outlet at side wall. Bottom is equipped with coil. Last time tank was used on food production.
Location: PL
Stock #U2265-4
Used vertical stainless steel storage tank with total volume 3900 l and working volume about 3600 l. Tank has internal diameter 1900 mm x and straight side of wall 1400 mm. Bottom, side walls and top are insulated. Top welded, has central feeding inlet and inspection manway with diameter 400 mm and lid. Flat bottom, with skew surface. Discharge outlet at side wall. Bottom is equipped with coil. Last time tank was used on food production.
Location: PL
Stock #U2265-2
Used vertical stainless steel storage tank with total volume 3900 l and working volume about 3600 l. Tank has internal diameter 1900 mm x and straight side of wall 1400 mm. Bottom, side walls and top are insulated. Top welded, has central feeding inlet and inspection manway with diameter 400 mm and lid. Flat bottom, with skew surface. Discharge outlet at side wall. Bottom is equipped with coil. Last time tank was used on food production.
Location: PL
Stock #L1015-05
Used Pontifex approximately 4,000 litre stainless steel reactor body. Unit measures approximately 1800mm diameter X 1750mm straight side. Has limpet coil jacket. Welded dished top and bottom. Mounted on 4 lugs.
Location: Perry England Warehouse
Stock #L0856-09
Used approximately 4,000 litre stainless steel vertical mixing vessel. Unit measures approximately 1500mm diameter X 2500mm straight side. Has bolted flat top and welded flat bottom heads. Unit includes 2-tier 2-blade and 4-blade stainless steel pitched paddle agitator with bridge mounted motor/gearbox. Unit is mounted on (4) leg supports.
Location: Perry England Warehouse
Stock #VL1205-02
Used approximately 4,000 litre stainless steel vertical storage vessel. Internal approximately 1600mm diameter X 2200mm straight side. Has welded dished top and bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #L0901-10
Used Websters approximately 4,200 litre stainless steel vertical mixing vessel. Unit measures approximately 2080mm diameter X 1470mm straight side X 1150mm long bottom cone. Has welded flat top and welded cone bottom heads. Internal rated liquid head at 1M at 110 deg.C. Unit includes top mounted stainless steel 2-tier 3-blade propeller agitator direct driven by 1.5 kW 240/415 volt 3/50 1425 rpm motor via plenty type PVG-150 gearbox rated 5/1 reduction ratio. Also includes 4-baffles. Mounted on (4) lugs.
Location: Perry England Warehouse
Stock #L1397-02
Used approximately 4,250 litre 316L stainless steel storage vessel. Unit measures approximately 1600mm diameter x 2100mm straight side. Has welded dished top and bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #L1397-01
Used approximately 4,250 litre 316L stainless steel storage vessel. Unit measures approximately 1600mm diameter x 2100mm straight side. Has welded dished top and bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #L1368-33
Used Sinclair Stainless Fabrications approximately 4,300 litre stainless steel storage tank. Unit measures approximately 1400mm diameter x 2400mm straight side. Internally rated full vacuum/1.7 bar design pressure at 110 deg.c. Has welded dished top and bottom heads. Unit is mounted on (4) lugs.
Location: Perry England Warehouse
Stock #VL1233-04
Used Giusti approximately 4500 litre 316 stainless steel vertical mixing vessel. Unit measures approximately 1800mm diameter X 1800mm straight side. Has welded flat top and welded Cone bottom heads. Unit includes stainless steel off-set propellor type agitator driven by a 0.25 kW, 1380 rpm, 220-240/380-415 volt, 1.4-1.55/0.8-0.89 amp motor through a gearbox. Unit is mounted on (4) stainless steel legs.
Location: Perry England Warehouse
Stock #VL1233-03
Used Giusti approximately 4500 litre 316 stainless steel vertical mixing vessel. Unit measures approximately 1800mm diameter X 1800mm straight side. Has welded flat top and welded cone bottom heads. Unit includes stainless steel off-set propellor type agitator driven by a 0.25 kW, 1380 rpm, 220-240/380-415 volt, 1.4-1.55/0.8-0.89 amp motor through a gearbox. Unit is mounted on (4) stainless steel legs.
Location: Perry England Warehouse
Stock #L1281-06
Used Sinclair Stainless Fabrications approximately 4,500 litre vertical stainless steel storage vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. Has welded dished top and bottom heads. Unit is mounted on (4) legs.
Location: Perry England Warehouse
Stock #L1192-02
Used approximately 4,500 litre 304 stainless steel vertical jacketed storage vessel. Unit measures approximately 1500mm diameter X 2840mm straight side. Has welded dished top and bottom heads. Unit is mounted on (4) legs.
Location: Perry England Warehouse
Stock #L1195-08
Used approximately 4,500 litre capacity vertical stainless steel vessel. Internal approximately 1600mm diameter X 1800mm straight side. Internally rated full vacuum/3.2 design pressure at 100 deg.C. Has welded dished top and bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #L1468-03
Used Websters 4,741 litre stainless steel storage vessel. Internal approximately 1400mm diameter x 2400mm straight side. Has welded dished top and bottom heads. Mounted on (4) legs.
Location: Perry England Warehouse
Stock #L1580-02
Used Moeschle approximately 4,900 litre total capacity 304 stainless steel vertical storage vessel. Unit measures approximately 1,000mm straight side x 2,200mm diameter. Unit has welded dished top and bottom heads. Unit mounted on (3) legs.
Location: Newton Aycliffe, UK
Stock #B0117-08
Used REUS stainless steel tank with ultrasound system-Type PEX3N-Total capacity 3 litre-Vessel Ø 130 x 220 mm-Double jacket-220 volts single phase
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0133-25
Used Stainless steel vessel-Capacity 20 litre-Vessel Ø 300 x 335 mm-With cover and without outlet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0105-05
Used Stainless steel hopper stirred-Total volume : 70 litre-Usable capacity : 50 litre-Vessel Ø 640 x 100 mm H x 540 mm-Double jacket-Gearmotor : Rpm 25 - 3x 220/380 volts-Agitation to be provided
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0133-08
Used Melter stainless steel-Total capacity 50 litre-Ø 390 x 460 mm-Electrical heating at the bottom of the vessel-4500 watts - Temperature : 30 to 110°C - 3x 380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0156-01
Used Stainless steel vessel-Volume 65 litre-Mobil steel frame-With handles and cover-Without outlet-Half-spherical bottom-Internal dimension: 400mmXØ400mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0105-01
Used Stainless steel mixing tank-Total volume : 90 litre-Usable capacity : 75 litre-Double jacket - Vessel Ø 500 x 450 mm-Agitations : 4 blades and scraper anchor-Gear motor : Hp 0.5 - Rpm 22 - 3x 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0133-21
Used Stainless steel vessel-Capacity 100 litre-Vessel Ø 470 x 600 mm-Without cover and without outlet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0133-15
Used Stainless steel electric agitated melter-Total capacity : 190 litre-Useful capacity : 150 litre-Vessel Ø 550 x 800 mm-Agitation : 4 blades + 1 turbine-Gear motor control : 1.1 kw - Hp 1.5 - Rpm 642 - 3x 220/380 volts-Double jacket with electric heating - 2 resistors of 4.5 kw/each
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0164-01
Used Stainless steel tank-Total capacity : 350 litre-Useful capacity : 300 litre-Cylindrical tank, vertical, open-Lateral outlet by valve Ø 50 mm-Circular footed bowl-Tank Ø 965 x 500 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0133-04
Used Mobile stainless steel vessel-Total capacity : 300 litre-Vessel Ø 745 x 745 mm-Draining by valve Ø 25 mm-Without cover
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0105-02
Used PIERRE GUERIN stainless steel mixing tank-Total volume : 358 litre-Usable capacity : 280 litre-Vessel Ø 800 x 700 mm outlet Ø 50 mm-Double jacket-Agitation : anchor and scraper-Gear motor : Hp 1 - 3x 220/380 volts-Variable speed
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0035-01
Used About 400 litre - open-Tank Ø 760 x 980 mm-With stainless steel half coil jacket
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0095-02
Used ABP stainless steel mixing vessel 430 litre with double jacket-Total volume : 430 litre-Usable capacity : 350 litre-Vessel Ø 900 x 800 mm internal with double jacket-Agitation : 3 blades-With 2 washing balls-Geared motor : 0.22/0.4 kw – Hp 0.3/0.54 – Rpm 60/125 – 3x 380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0133-16
Used DIESSEL stainless steel mixing vessel-Total capacity : 670 litre-Useful capacity : 500 litre-Vessel Ø 985 x 1060 mm-Stainless steel double jacket-Agitation : 2 blades-Gear motor : 1.5 kw - Hp 2 - Rpm 365 - 3x 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0095-01
Used Stainless steel mixing vessel 600 litre with double jacket-Total volume : 600 litre-Usable capacity : 500 litre-Vessel Ø 1000 x 850 mm internal with double jacket-3 blades Ø 600 mm and anchor agitation-Geared motor : 2.6/3.5 kw - Hp 3.5/4.7 - 2 speed – 3x 380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0095-03
Used GOAVEC stainless steel vessel 697 litre with double jacket-Total volume : 697 litre-Useful capacity : 400 litre-Vessel Ø 1100 x 1000 mm internal with double jacket-Possibility of study for setting up a motorised agitation
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0076-02
Used Mild steel chocolate melter-Total capacity : 950 litre-Useful capacity : 750 litre-Tank Ø 1000 x 1250 mm-Outlet DN50-Agitation frame : geared motor : Hp 2 - Rpm 22 - 220/380 volts-Double jacket-Electric heating 3 x 1 kw-With electric control panel
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0160-01
Used Stainless steel mixing tank-Total capacity 1200 litre-Useful capacity 1000 litre-Tank Ø 1140 x 1200 mm-Outlet Ø 25 mm-Agitator :-3 blades - Biffles-Control : Gear motor : 2.2 kw - Hp 3 - Rpm 120 - 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0085-02
Used Stainless steel mixing tank double jacket-Manufacture : CHAUDRONNERIE INDUSTRIELLE ET CONSTRUCTIONS SPECIALES-Total volume : 1600 litre-Useful capacity : 1300 litre-Vessel Ø 1500 x 1150 mm-Outlet Ø 70 mm without valve-Anchor agitator - Baffle -Gear motor Hp 4
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0129-02
Used Stainless steel mixing tank-Total capacity 1400 litre-Useful capacity 1300 litre-Vessel Ø 1200 x 1500 mm-Stirring 3 blades-Motor 0.37 kw - Hp 0.5 - Rpm 1000 - 3x 220/380 volts-Overall height: 2.30 m
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0105-04
Used PIERRE GUERIN stainless steel mixing tank-Volume capacity : 1700 litre-Useful capacity : 1500 litre-Double jacket-Vessel Ø 1200 x 1600 mm-Agitation 3 blades + 3 baffles-Motorization to be planned-Overall height: 2.75 m
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0009-01
Used Stainless steel ATCS mixing tank 1815 litres with 2 agitator-Volume 1815 litres - Dished bottom-Vessel Ø 1250 x 1300/250 mm-Outlet by valve Ø 105 mm-Agitator turbine : power and speed must be confirmed-Homogenizer : Hp 5.5 - Rpm 1500 - 3x 220/380 Volts-Without electrical control panel
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0085-01
Used Stainless steel mixing tank with double insulated jacket-Total capacity : 2300 litre-Useful capacity: 2000 litre-On gussets-Double jacket with insulated-Vessel Ø 1280 x 200 + 1600 + 200 = 2000 mm-Drive : geared motor : Hp 1.7 - Rpm 288- 230/400 volts-Magnetic transmission-4 blades agitation at the bottom of the tank -Outlet by valve Ø 38 mm-Interior of polished stainless steel tank-External dimension: L 255 mm - Ø 175 mm-Subject to: ferrule thickness: 8 mm - base and dome thickness: 9 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #BG0042-01
Used Stainless steel mixing vessel 2000 litre with double jacket-Total volume : 2000 litres approx.-Used capacity : 1800 litres approx.-Internal dimensions : Ø 1700 x 1100 mm-Double jacket on the bottom-Agitation : 4 blades-Control : geared motor
Location: FRANCE
Stock #B0021-01
Used Useful capacity 3000 litres-Tank Ø 1800 mm - Conical bottom-Agitation : 2 Propellers, 3 Blades and 1 Dissolver-Geared Motor 55 Kw / Hp 75 - Rpm 205 - 400/690 Volts-Delivered without the washing hoses-Equipment visible on appointment and sold as is
Location: FRANCE